All Products

SKU: SF-KIT-15073

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...

SKU: SF-SEN-15103

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measures both mass concentration and particle count across PM1.0, PM2.5, PM4.0, and PM...

SKU: LB-LR0289

With the passive buzzer you can control the volume by PWM. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than producing a tone automatically. Power supply needs: 5V Interface type: Analog...

SKU: AF-2461

Wow that's a tiny GPS antenna! This passive antenna is only 15mm x 15mm x 6.8mm in size, with a 50mm long uFL cable. Great for when you want to keep things small. Comes with a standard uFL connector on the end. Perfect for our FONA 808! Not good for our Ultimate GPS breakouts/shields/hat as t...

SKU: AF-2460

An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5 mm uFL Connector – Standard uFL interface for easy connection to GPS modules ...

SKU: SF-CAB-10759

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these powe...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: AF-5178

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Pink MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch&...

SKU: DF-FIT0720

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with compact boards like the DFRobot Beetle or any module without pre-soldered headers...

SKU: DF-SEN0639 · MPN: SEN0639

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a thermopile structure to calculate airflow without mechanical moving parts.The boar...

SKU: SF-WRL-18086

This small form-factor antenna offers a 2.4GHz frequency range. These antennas offer adhesive backing that simplifies mounting within the device for a FPC or PCB. Just connect the antenna using the attached U.FL connector and then peel and stick! Features: Frequency range: 2400-2500Mhz Polariz...

SKU: AF-5719

This PCB coaster features the Adafruit logo in gold ENIG (Electroless Nickel Immersion Gold) finish on a sturdy 100 × 100 mm FR4 circuit board with black silkscreen. The gold plating resists oxidation, keeping the design looking sharp on your workbench, desk, or coffee table. Four adhesive rubbe...

SKU: SF-TOL-14816

This is a two pack of #501 PCB engravers from Carbide 3D for your Shapeoko or Nomad CNC machine to supply you with even more fabrication and milling options. Each PCB engraver possesses a 0.1" ball tip with a 0.005" radius, a 60 degree tip angle, and is made of solid carbide to ensure long lastin...

SKU: SF-TOL-14815

This is a two pack of #502 PCB engravers from Carbide 3D for your Shapeoko or Nomad CNC machine to supply you with even more fabrication and milling options. Each PCB engraver possesses a 0.005" ball tip with a 0.0025" radius, a 40 degree tip angle, and is made of solid carbide to ensure long las...

SKU: LB-LS4650

This flat and dense vise is great because your hands can rest directly on the work table, allowing you to steady yourself with minimal effort for precise soldering and probing. The thick metal plate keeps it from moving around so you don't have to worry about the PCB shifting while you're tr...

SKU: LB-5-EDGE

These 2.54mm pitch edge card connectors are designed for interfacing with compatible PCBs or circuit boards, allowing easy data transmission. They are commonly used in computers as expansion slots for peripheral cards, as well as in game consoles and other electronic systems.What’s included?Packa...

SKU: TB-HP9540

Vero board with Alpha numeric grid.

SKU: DF-DFR0009-BP

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. The pcb is compatible with the following LCD: Basic 16x2 Character LCD -...

SKU: LB-LS4651

A versatile PCB stand with magnetic clips for holding circuit boards during soldering, assembly, and repair. The six freely positionable magnetic pins grip boards securely from below, accommodating PCB thicknesses from 0.2 to 1.8 mm. The pins never demagnetise, providing reliable clamping every t...

SKU: SF-COM-30225 · MPN: COM-30225

This P-channel MOSFET is designed for efficient power management and load switching in compact electronics projects. With a 30V drain-source rating and 3.8A continuous drain current rating, it is suited to controlling higher-power loads from a low-power control signal.Its low gate threshold volta...