All Products

SKU: DF-DFR0650

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable ...

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: AF-931

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: AF-938

A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in excellent contrast and readability in a compact form factor. The breakout board i...

SKU: AF-5228

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED – 128 × 64 pixel resolution SH1106G Driver – SPI interface 16-Pin FPC Connecto...

SKU: AF-2675

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or off by the con...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: AF-2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the co...

SKU: SF-TOL-09316

When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-½". The 1" diameter eye piece fits snugly around your eye with a 15" aluminum-core headband. Th...

SKU: DF-FIT0601

A lightweight, flexible monocrystalline silicon solar panel with an integrated 5 V voltage regulator and USB Type-A output. The PET-laminated design weighs just 90 g and includes mounting holes and copper clasps for attaching to backpacks or outdoor enclosures. The panel delivers up to 1 A at 5 ...

SKU: EC-PS0306MGE

Need a clean energy source for your project? Check out this compact, high quality, high output endurable solar panel. This solar panel mates directly with many of our development boards and has a high efficiency. Unit has a clear epoxy coating with hard-board backing, provides an efficient and wa...

SKU: AF-5986

This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...

SKU: AF-3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input ca...

SKU: AF-4445

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. This speaker comes with plain bare wires (no connector), making it easy to sold...

SKU: AF-5757

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids, LED strips, pumps, and motors from a microcontroller. Supplied as a PCB with ...

SKU: JU-R-E225

A Douglas Adams-inspired hard enamel lapel pin featuring the iconic phrase "Mostly Harmless" on a cheeky poison bottle design. Perfect for fans of The Hitchhiker's Guide to the Galaxy who want to wear their gentle-yet-edgy nature on their sleeve — or collar, bag, or hat. Key Features Hard Enam...

SKU: JU-R-E39

A colourful, gold-backed hard enamel lapel pin from Jubly-Umph, celebrating the heroic efforts of everyday parenting. Beautifully presented on a Jubly-Umph backing card. Details Material – Hard enamel with gold backing Length – 45 mm Limited Edition Presentation – Mounted on a Jubly-Umph bac...

SKU: LB-2-PIR-AUDIO

Introducing our innovative Audio Player with PIR Motion Sensor, designed for seamless integration and the automatic triggering of audio alerts by motion detection. Explore the standout features of this versatile device: Flexible Motion Sensing: Features a separate PIR motion sensor, allowing for...

SKU: IT-IM120417005

Overview MotoMama is a Arduino shield based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motor.  For power supply , power terminal on board is available – it will also power the Arduino board.  Or from the power jack ...