All Products

SKU: AF-5956 · MPN: ADA5956

The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB Host chip, communicating over SPI with an IRQ pin. With driver support through ...

SKU: AF-2107

The Adafruit USB Isolator provides galvanic isolation between your computer's USB port and connected devices, protecting against harmful noise, ground loops, surges, and voltage spikes. Based on Analog Devices' USB isolator technology, it supports both Low Speed (1.5 Mbps) and Full Speed (12 Mbps...

SKU: AF-6323

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) resistors required for proper USB C-to-C negotiation at 5V — this inline adapter ...

SKU: AF-5978 · MPN: ADA5978

The Adafruit USB Type C Plug Breakout gives you easy access to the pins on a USB-C plug connector, making it simple to add a USB-C connection to your projects. A 5.1K resistor on the CC1 pin signals the upstream host to provide 5V at up to 1.5A, so you get reliable power negotiation out of the bo...

SKU: AF-5991 · MPN: ADA5991

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. Built around the HUSB238 PDL003A E-Marker variant, it can request up to 5A for a ...

SKU: AF-4161

The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all over a simple I2C interface. The breakout includes 3.3V and 5V level-shifting circ...

SKU: AF-4162

The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (an SI unit), giving you consistent and comparable measurements across multiple s...

SKU: AF-3317

The Adafruit VL53L0X is a Time-of-Flight (ToF) distance sensor from ST that uses an invisible laser to measure distances from approximately 50 mm to 1200 mm. By timing how long the laser light takes to bounce back, it delivers precise distance readings without the linearity issues or double-imagi...

SKU: AF-3967

The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, it measures how long light takes to bounce back for accurate, reliable distance ...

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: AF-5425

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long light takes to bounce back, delivering accurate distance readings without the linea...

SKU: AF-3316

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light sensor (lux), making it a versatile two-in-one module for proximity and light measure...

SKU: AF-5568

The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATmega328 boards — no manual pin manipulation needed. The pinout matches standard F...

SKU: AF-4022

Measure invisible magnetic fields with the Adafruit Wide-Range Triple-axis Magnetometer, featuring the MLX90393 sensor. With 16-bit resolution across all three axes and a dynamic range of ±5 mT to ±50 mT, this sensor is ideal for detecting magnets and magnetic orientation rather than the Earth's ...

SKU: AF-4836

Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you can use the controller with any 3.3V or 5V microcontroller. The Wii Nunchuck co...

SKU: AF-3653

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: AF-3654

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: AF-6348 · MPN: ADA6348

Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a fast, dependable network connection. The breakout includes full level shifting...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-701

Celebrate Ada Lovelace — one of the world's first computer programmers — with this glossy vinyl sticker. Featuring a full-colour woodcut-style portrait based on the nineteenth century A. E. Chalon painting, this sticker is perfect for laptops, workbenches, or anywhere you want to honour a pioneer...