DFRobot
TFA300-L 290m 10kHz Lightweight Single-Point LiDAR Sensor
·
The TFA300-L is a compact single-point LiDAR sensor designed for fast, precise distance measurement on dynamic platforms such as drones and optoelectronic sy...
Get notified when back in stock
The TFA300-L is a compact single-point LiDAR sensor designed for fast, precise distance measurement on dynamic platforms such as drones and optoelectronic systems. It uses Time-of-Flight (ToF) laser ranging to provide rapid updates, with an adjustable measurement frequency up to 10,000Hz.
With detection up to 290m on high-reflectivity targets and a lightweight ~10.5g body, it is well suited to UAV obstacle avoidance, stable altitude control and intelligent target tracking where size, weight and power matter.
Integration is supported through UART and CAN interfaces via a JST GH1.25mm-7PIN connector. DroneCAN protocol support is available via the provided SDK, helping it fit into modern flight controller ecosystems. The package includes the TFA300-L LiDAR sensor and a connecting cable.
Features:
- Single-point Time-of-Flight (ToF) laser ranging technology
- Maximum measurement frequency up to 10,000Hz
- Long-distance detection up to 290m (90% reflectivity)
- High measurement resolution of 1cm
- Lightweight design (~10.5g) optimized for UAV payloads
- Compact size: 32.0 × 30.2 × 20.2mm
- Dual communication interfaces: UART and CAN
- Supports DroneCAN protocol via SDK
- High ambient light resistance up to 100KLux
- Stable operation in rain, fog, sand, and dust environments
Specifications:
- Measurement range: 290m@90% reflectivity, 170m@30% reflectivity, 100m@10% reflectivity
- Blind area: ≤0.1m
- Ranging accuracy: ±10cm (<10m), 1% (≥10m)
- Repeat accuracy: <3 cm@1σ
- Distance resolution: 1cm
- Frame rate: 1-10000hz adjustable (default 50hz)
- Ambient light resistance: 100Klux
- Light source: EEL
- Center wavelength: 905nm
- Field of view: <0.5°
- Laser safety level: Class1 (IEC 60825-1:2014; EN 60825-1:2014+A11:2021)
- Average power consumption: ≤0.45W
- Startup peak current: 0.75A
- Supply voltage: DC5±10%V
- Level voltage: 3.3V TTL
- Connection terminal: JST GH1.25mm-7PIN
- Operating temperature: -20℃ ~ +60℃
- Storage temperature: -40℃ ~ +80℃
- Dimensions: 32.0x 30.2 x 20.2mm
- Weight: ~10.5g
A strong choice for high-speed drones, aerial robotics and compact tracking payloads needing long-range sensing with fast update rates.
Find this product in
Sensors & Input
Supplier page — dfrobot.com
Supplier Description · 152.1 KB · Click any page to view full size
Jargon buster
Plain-language definitions for the technical terms in the product description.
- 3.3V TTL
- 3.3V TTL means the serial logic signals use 3.3 volt levels rather than 5 volts. This matters because connecting it directly to a 5V-only signal can damage the module or cause unreliable communication unless level shifting is used.
- LiDAR
- A sensing method that uses laser light to measure distance and build a 3D picture of the surroundings. It matters for robotics and autonomous systems because LiDAR data can help with mapping, navigation and obstacle detection.
- Matter
- A smart home connectivity standard designed to let devices work across different ecosystems. It matters if you want a project to integrate more easily with platforms such as Apple Home, Google Home, or other Matter-compatible systems.
- UART
- UART is a simple asynchronous serial interface that sends data over separate transmit and receive wires, usually labelled TX and RX, with both ends set to the same baud rate. It is a common way for microcontrollers and other serial devices to exchange data.
- UAV
- UAV stands for Unmanned Aerial Vehicle, an aircraft that flies without an onboard pilot, such as a drone or autonomous aircraft. Because airborne platforms have limited payload, factors like weight, power draw and any positioning features such as GNSS or RTK are often important considerations.
- wavelength
- The distance between repeating peaks of a wave, often used to describe the colour of light in nanometres. For visible lasers and LEDs, wavelength tells you the approximate colour, such as red, green or blue.