Store

Waveshare

5.0 (1 review)

$21.94 |
In stock
5.0 (1 review)

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed fo...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout
SX1262 LoRa Node Module For Pico

LoRaWAN Protocol Support

Features At A Glance

The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing problem between transmission distance, interference immunity, and power consumption that traditional solutions aren't able to deal with. 


It supports LoRaWAN protocol, which allows it to connect the TTN, ChirpStack servers through a LoRa gateway to use LoRa Cloud service fast and easily.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • Supports LoRaWAN protocol, different frequency bands are available
  • Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
  • Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
  • PH1.25 battery header and recharge controller, allows connecting rechargeable Lithium battery
  • High receiving sensitivity (up to -148dBm), programmable emitting power (up to 22dBm)
  • Supports preamble detection, with CRC, up to 256 bytes data packet engine
  • Comes with development resources and manual (example in C)
Specifications
FREQUENCY BAND433M
(410~525MHZ)868M
(863~870MHZ)915M
(902~930MHZ)

RFID | SX1262
Emiting power | 22dBm
Emiting current | 107mA@22dBm | 118mA@22dBm
Receiving current | 5.3mA@125KHz
Modulation | LoRa/(G)FSK
Operating voltage | 3.3V
Communication bus | SPI
Operating temperature | -40 ~ 85℃
Dimensions | 21.00 × 52.00mm
Raspberry Pi Pico Header Compatibility

Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico

Raspberry Pi Pico is NOT included.
What's On Board
  1. Raspberry Pi Pico header
  2. Status indicators
    PWR: power indicator
    CHG: recharge indicator
  3. RF switch control
    A: controlled by high level
    B: controlled by GPIO22
 
  1. MCP73831 recharge IC
  2. SX1262 module
  3. IPEX 1 antenna connector
  4. Power switch
  5. PH1.25 battery header
Pinout Definition
Application Examples

Industrial Control, Intelligent Home, And Data Acquisition...

Outline Dimensions
Resources & Services

Jargon buster

Plain-language definitions for the technical terms used above.

LoRa
LoRa is a long-range, low-power radio technology often used for telemetry and remote sensors. It matters here because the connector and pinout are compatible with some LoRa telemetry products, even though this module uses Bluetooth instead.
MCP73831
A lithium battery charger chip used to safely charge a single-cell LiPo battery. It matters because it lets the board recharge a battery from USB or another input without needing a separate charger module.
RF
RF means radio frequency, referring to signals used for wireless communication and other high-frequency electronics. A low-noise, stable power supply is important for RF circuits because power noise can affect signal quality and measurements.
SPI
A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Temperature compensation
Temperature compensation means the sensor adjusts its readings to reduce errors caused by changes in water temperature. This matters for field monitoring because ponds, rivers, and tanks can vary in temperature throughout the day and across seasons.
Stella
Stella Expert

Ask me anything about this product

Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.