Adafruit
Snap Action 2-to-6 Wiring Block Connector
A lever-action wiring block connector that splits two inputs into six outputs — two separate channels, each with one input and three outputs. Colour-coded bl...
A lever-action wiring block connector that splits two inputs into six outputs — two separate channels, each with one input and three outputs. Colour-coded blue and red terminals make it easy to trace connections for power or signal fan-outs.
Each block has internal metal contacts with snap-open levers that clamp securely onto stranded or solid-core wire from 12 AWG to 24 AWG. No soldering, crimping, or screwdrivers required — just open the lever, insert the wire, and snap closed. Fully reusable.
Key Features
- Configuration – 2-to-6 (two separate input-to-three-output channels)
- Wire Compatibility – Stranded or solid-core, 12–24 AWG
- Tool-Free – Lever-action clamping, no soldering or crimping needed
- Colour-Coded – Blue and red terminals for easy identification
- Reusable – Open the lever to release and re-route wires
Ideal For
- Quick prototyping and free wiring without soldering
- Power or signal distribution from one source to multiple outputs
- LED and motor wiring in maker projects
Package Contents
- 1× Snap Action 2-to-6 wiring block connector
Jargon buster
Plain-language definitions for the technical terms used above.
- AWG
- American Wire Gauge is a numbering system for wire thickness, where a lower number means a thicker wire. The AWG rating matters because thicker wire can usually carry more current with less voltage drop and heating.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
Find this product in
Prototyping & Wiring
Related Tutorials
Free guides on learn.littlebird.com.au
