Waveshare
Raspberry Pi 4G HAT SIM7600NA-H – LTE Cat-4, GNSS, North America
· MPN: 30717
All Products
GPS & Location Sensors
New Arrivals
Raspberry Pi
Brands and Manufacturers
Raspberry Pi 4G/5G Hats
LoRa & Cellular Modules
Wireless & Connectivity
Connectivity
Raspberry Pi Hats
Waveshare
$98.00
|
In stock at supplier
Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps ...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite navigation — all controlled via standard AT commands.
The HAT connects via the standard 40-pin GPIO header and is compatible with Raspberry Pi series boards and the Jetson Nano. An onboard CP2102 USB-to-UART converter and USB interface make testing and debugging straightforward.
Key Features
- LTE Cat-4 – Up to 150 Mbps downlink / 50 Mbps uplink (theoretical max)
- Multi-Protocol Support – Dial-up, phone calls, SMS, TCP/IP, UDP, DTMF, HTTP, FTP
- GNSS Positioning – GPS, BeiDou, GLONASS, Galileo, and QZSS
- Audio Jack – Onboard audio decoder for making and receiving calls
- Dual Interface – USB and UART (CP2102) for AT command control and debugging
- LED Indicators – Two status LEDs for monitoring operation
- Voltage Flexibility – 3.3V or 5V logic, configurable via resistor pad
- AT Command Control – 3GPP TS 27.007, 27.005, and V.25TER compliant
Specifications
- Module – SIMCom SIM7600NA-H
- Region – North America frequency bands
- GNSS Sensitivity – -159 dBm (GPS) / -158 dBm (GLONASS)
- Power Input – 5V
- Dimensions – 56 × 65 mm
Note: This is the North America variant (SIM7600NA-H). Frequency bands are optimised for North American LTE networks. Check your carrier's band requirements for compatibility in other regions.
Compatibility
- Raspberry Pi (all 40-pin models)
- Jetson Nano
Package Contents
- 1× SIM7600NA-H 4G HAT Module
- 1× Multi-band SMA Antenna (4G)
- 1× GPS External Antenna
- USB cables
- Mounting screws
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- 4G LTE
- 4G LTE is a cellular data standard used for internet access through mobile networks. For this controller, LTE expansion matters when a project needs remote connectivity where wired Ethernet or Wi-Fi is not available.
- Galileo
- Europe’s satellite navigation system. Galileo support can improve satellite availability and accuracy, especially when combined with GPS and other constellations.
- GLONASS
- Russia’s satellite navigation system. A receiver that can also use GLONASS has more satellites to choose from, which can improve positioning reliability when the sky view is partly blocked.
- GNSS
- GNSS stands for Global Navigation Satellite System, covering positioning systems such as GPS and similar satellite networks. It matters here because high-precision GNSS modules can output lots of serial position data that this product can send wirelessly to a computer or phone.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- GPS
- The US satellite navigation system used by GNSS receivers to calculate position and time. Support for GPS is important because it is widely available and often used together with other constellations for more reliable positioning.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- QZSS
- Japan’s regional satellite navigation system designed to improve coverage around Japan and the Asia-Pacific region. QZSS support can improve satellite availability in supported regions when used alongside GPS.
- SMA
- A threaded coaxial connector commonly used for antennas. It matters because you need antennas with matching SMA connectors, or suitable adapters, for the LTE and GNSS antenna ports.
- UART
- UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.
Find this product in
Connectivity
Raspberry Pi
