Raspberry Pi 4 Aluminium Alloy Case With Cooling Heatsink

noice

Aaron Stevenson

It does what is says on the tin

Cooper Williams

Looks like a great product. It came quickly. Online instructions are a little outdated as there is one additional thermal tape piece; but it’s simple to figure out where it should go by looking at the top aluminium piece. Happy customer.

Gabriele Vanni

Product is great

Matthew Bottrell

Applied this to the new Raspberry Pi 4 and it works a treat! No fans to wear out and it does the job. the key chips are connected back to the aluminium heat sink via heat-conductive foam, so the chips should work just fine for most indoor applications, which is my situation.

Ross Summerfield

The good: It's solid and a very complete package. Looks pretty nice too. There are cutouts for the display and camera connectors. The bad: You can't actually attach cables to the camera and display connectors once the top cover is in place. You need to do that beforehand. I'm sure you're thinking "Just unscrew the cover", but there's adhesive thermal tape under it so I am not sure what's going to happen there.

Christopher Moran

Great tool!

Scott White

My Raspberry PI 4 in the standard case was seeing CPU temperatures of between 65 and 75 degrees C (and sometimes up to 80 degrees C) which I was concerned about. I recently purchased one of these cases with the aim of moderating the high temperatures. I was pleased to find that the case reduced the operating temperatures by almost 20 degrees, and the CPU temperature now varies between approximately 45 and 55 degrees C. You can find a blog post about my experience with the case here: https://newadventuresinwi-fi.blogspot.com/2020/03/heatsink-case-for-raspberry-pi-4.html

oscillatory

The supplied thermal tape disintegrated and was unusable. Otherwise a good heatsink.

Adrian Mauriks

This little item certainly takes the heat out of the Pi4.

Bill McDermott

The heat sink case is very compact, and well made. It keeps the SoC easily cool enough for normal use, but I have not yet run my PI4 to high CPU usage to check that aspect. Installation is easy with only one caution - the flexible thermal pads used to connect the board components to the raised pads of the heat sink are neither easy to remove from their protection, nor physically robust. Take care, take it slowly and remove the white side carefully. The clear side is easier to remove.

John Paterson

Easy to install and keeps it cool

Michael Mainwaring

Beautifully made and such a different approach to a Raspberry Pi case. Very impressed

Peter Bender

Huge improvement on the running temp on my Pi4. Went from an idle 77 degrees Celcius to 52 degrees. Highly recommend!

Jason McDonald

Great looking heatsink, installed easily and quickly. My RPi4 was running quite hot - now it reports an "optimal" temperature of 48 degrees Celsius.

Gary Speechley

I give the Raspberry Pi 4 Aluminium Alloy Case With Cooling Heatsink a rating of 5 stars!

Christo Nel

Nice precision made case, that is easy to fit. It even comes with the allen key needed to assemble the case, and also comes with a spare thermal pad for the pi’s SOC. Looks a treat and really helps tame the pi’s heat!

Geoff Thornton

Great manufacturing & looks great too, most importantly keeps the RPi4 cool too

Richard Waters