Premium Male/Male Jumper Wires - 40 x 6 (150mm)
I give the Premium Male/Male Jumper Wires - 40 x 6 (150mm) a rating of 5 stars!
Cooper Lehman
Adafruit
Premium Male/Male Jumper Wires - 40 x 6 (150mm)
·
All Products
Circuitry Accessories
New Arrivals
Adafruit
Circuitry & IOT
Brands and Manufacturers
Jumpers & Wires
Prototyping
Digital Technologies
Prototyping & Wiring
$9.50
|
Out of stock
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 piece...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.
We have these in three handy lengths: 3"/75mm, 6"/160mm and 12"/300mm. If you want the female/female type, we have those too!
Note: The length of the jumper wires is sometimes a bit longer than what is listed.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Brands
Prototyping & Wiring
Related Tutorials
Free step-by-step guides
