Adafruit
Mini-Magnet Feet for RGB LED Matrices (Pack of 4)
All Products
New Arrivals
Adafruit
Enclosures & Hardware
Brands and Manufacturers
LEDs
LEDs & NeoPixels
Prototyping & Wiring
$5.55
|
In stock at supplier
A pack of four magnetic mounting feet designed for RGB LED matrix panels. At 16.6 mm long, each magnet-screw slots into the standard 3 mm mounting bosses fou...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A pack of four magnetic mounting feet designed for RGB LED matrix panels. At 16.6 mm long, each magnet-screw slots into the standard 3 mm mounting bosses found on most RGB matrix panels, providing a quick and secure way to display your project on any magnetic surface.
Compatible Panels
- 16×32 RGB LED Matrix – 6 mm pitch
- 32×32 RGB LED Matrix – 4 mm, 5 mm, or 6 mm pitch
- 64×32 RGB LED Matrix – 3 mm, 5 mm, or 6 mm pitch
- 64×64 RGB LED Matrix – 2.5 mm pitch
- Any RGB matrix panel with 3 mm mounting bosses
Package Contents
- 4× Mini-magnet feet
Note: RGB matrix panel is not included.
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- RGB
- Short for red, green and blue, the three primary colours of light that are mixed in varying amounts to make a wide range of colours. In electronics RGB can refer to an LED or pixel that blends these three colours, or to a colour signal or interface that carries separate red, green and blue channels.
Find this product in
Brands
Components
Related Tutorials
Free guides on learn.littlebird.com.au
