Pimoroni
Micro Metal Gearmotor (Extended back shaft) - 50:1
All Products
New Arrivals
Robotics
Actuators
Brands and Manufacturers
Motors (DC, stepper, servo)
Pimoroni
$10.60
|
Out of stock
This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run curren...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.
RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80mA (160mA max)0.12kg. cm650mA20:11050±10% rpm90mA (180mA max)0.26kg. cm850mA50:1420±10% rpm80mA (160mA max)0.5kg. cm770mA298:175±10% rpm60mA (120mA max)2.5kg. cm900mA1006:114.2±10% rpm28mA (56mA max)5.3kg. cm- All of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.
- Long (9mm), 3 mm-diameter D-shaped metal output shaft.
- 4.5mm long, 1mm diameter back shaft, great for optical encoders!
Find this product in
Brands
Robotics & Motion
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.