DFRobot
Micro Metal Gear Motor with Connector (50:1)
This compact micro metal gear motor features a 50:1 gear ratio and a D-profile metal output shaft, making it ideal for small robotics platforms and wheeled p...
Get notified when back in stock
This compact micro metal gear motor features a 50:1 gear ratio and a D-profile metal output shaft, making it ideal for small robotics platforms and wheeled projects. The shaft dimensions are compatible with Pololu 42×19mm and 32×7mm wheels.
The motor comes with a PH2.0 connector for solderless wiring, and an integrated circuit provides enhanced anti-jamming capability. Two M1.6 threaded mounting holes on the brass faceplate allow direct mounting, or you can use compatible mounting brackets to enclose the exposed gears.
Key Features
- 50:1 Gear Ratio – Balanced speed and torque for small robots
- Metal Output Shaft – D-profile, 9.27mm long, compatible with Pololu wheels
- PH2.0 Connector – Solderless plug-and-play wiring
- Anti-Jamming IC – Integrated circuit for reliable operation
- M1.6 Mounting Holes – Threaded faceplate for direct or bracket mounting
- Lightweight – Only 15g
Specifications
- Operating Voltage – 1.0–6.0V
- Motor Speed – 440 RPM @ 6V
- Gear Ratio – 50:1
- Rated Current – 30 mA @ 6V
- Stall Current – 350 mA @ 6V
- Stall Torque – 0.39 kg·cm @ 6V
- Weight – 15g
Ideal For
- Small robot platforms and chassis
- Wheeled robot drives
- Motorised mechanisms and prototypes
Package Contents
- 1× Micro Metal Gear Motor with PH2.0 connector (50:1)
- 1× Double PH2.0 cable
- 1× Single PH2.0 cable
Resources
Find this product in
Brands
Robotics & Motion
Motor Dimensions
Mechanical Drawings · 223.6 KB · Click any page to view full size
Supplier page — dfrobot.com
Supplier Description · 448.4 KB · Click any page to view full size
Jargon buster
Plain-language definitions for the technical terms in the product description.
- kg·cm
- A torque unit often used for hobby servos, meaning how many kilograms of force the servo can hold at a 1 cm arm length. A higher kg·cm rating means the servo can move or hold heavier loads, but power supply current needs may also increase.
- Stall torque
- The maximum twisting force a servo can produce when its output is held still and cannot move. It helps you judge whether the servo is strong enough for a robot joint, steering linkage, or other load.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.