SparkFun
LIDAR-Lite v3HP
The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers acc...
Get notified when back in stock
The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers accurate range measurements from 5 cm to 40 m, making it an ideal solution for drones, robots, and unmanned vehicles.
Compared to the LIDAR-Lite v3, the v3HP offers faster sampling rates above 1 kHz (vs 500 Hz) and improved power efficiency with approximately 40 mA less current draw. The sensor is fully user-configurable, allowing you to adjust the balance between accuracy, operating range, and measurement time. It interfaces via I²C or PWM using the included 200 mm cable.
Key Features
- 40 m Range – Accurate optical distance measurement from 5 cm to 40 m
- ±2.5 cm Accuracy – At distances greater than 1 m
- High Sample Rate – Greater than 1 kHz for fast-moving applications
- IPX7-Rated Housing – Durable and water-resistant enclosure
- Low Power Consumption – 65 mA idle, 85 mA acquiring
- Dual Interface – I²C or PWM output via included 200 mm cable
- User Configurable – Adjustable accuracy, range, and measurement time trade-offs
Specifications
- Range – 5 cm to 40 m
- Accuracy – ±2.5 cm (at >1 m)
- Sample Rate – >1 kHz
- Laser – 905 nm edge-emitting, 1.3 W single-stripe transmitter
- Beam Divergence – 8 mrad
- Optical Aperture – 12.5 mm
- Operating Voltage – 5 V DC (6 V max)
- Peak Power – 1.3 W
- Current (Idle) – 65 mA
- Current (Acquiring) – 85 mA
- Interface – I²C or PWM
- Cable Length – 200 mm (included)
Ideal For
- Drone altitude and obstacle avoidance
- Robotic navigation and mapping
- Unmanned vehicle distance sensing
- Industrial proximity measurement
Find this product in
Brands
Sensors & Input
LIDAR-Lite v3HP Operation Manual and Technical Specifications
User Guide · 721.4 KB · Click any page to view full size
Moving from LIDAR-Lite v3 to v4 Guide
Product Brief · 345.1 KB · Click any page to view full size
LIDAR-Lite Important Safety and Product Info
Document · 177.3 KB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 905.3 KB · Click any page to view full size
LIDAR-Lite v3HP Operation Manual
User Guide · 2.4 MB · Click any page to view full size
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- LiDAR
- A sensing method that uses laser light to measure distance and build a 3D picture of the surroundings. It matters for robotics and autonomous systems because LiDAR data can help with mapping, navigation and obstacle detection.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.