Adafruit
JST PH 3-Pin to Male Header Cable - 200mm
The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male ...
The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board.
At 200 mm long, this cable provides enough reach for prototyping while keeping wiring tidy. The colour-coded wires make it easy to identify signal, power, and ground lines at a glance.
Key Features
- JST PH 3-Pin Connector – Standard 2.0 mm pitch, widely used on sensors and small modules
- Male Header Pins – 0.1" (2.54 mm) pitch for direct breadboard or header insertion
- Colour-Coded Wires – Easy identification of each conductor
- 200 mm Length – Suitable for prototyping and bench setups
Ideal For
- Connecting JST PH sensors or LEDs to breadboards
- Prototyping with development boards that use 0.1" headers
- Extending connections on projects using Adafruit HalloWing or similar boards
Package Contents
- 1× JST PH 3-Pin to Male Header Cable (200 mm)
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of metal pins used to plug a module into a breadboard or connect it with jumper wires. Pre-soldered headers make the module easier to use straight away without needing to solder the pins yourself.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- pH
- A measure of how acidic or alkaline a liquid is, on a scale where 7 is neutral. For a water monitoring kit, pH tells you about water chemistry and whether the included probe matches the range and accuracy your project needs.
Find this product in
Brands
Prototyping & Wiring
Related Tutorials
Free guides on learn.littlebird.com.au
