FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers
These are excellent for prototyping with feather boards
Greg White
Adafruit
FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers
·
All Products
Breakouts
New Arrivals
DIY Project Kits
Feather
Prototyping
Digital Technologies
Prototyping & Wiring
$17.10
|
In stock at supplier
The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-conn...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring.
Comes as a mini kit — you'll need to solder the included female headers onto the PCB.
Key Features
- Triple Feather Slots – Mount one Feather and two FeatherWings without stacking
- Cross-Connected Pins – All three breakouts share the same pin connections
- Power Strips – Full connected pads for GND and 3.3 V
- Proto Area – Grid of plain through-holes for custom circuitry
Package Contents
- 1× FeatherWing Tripler PCB
- 3× Feather female header sets (12-pin and 16-pin)
Note: Soldering required. The female headers must be soldered onto the PCB before use.
Jargon buster
Plain-language definitions for the technical terms used above.
- FeatherWing
- A FeatherWing is an add-on board made to plug into the Feather microcontroller board layout. Knowing a product is a FeatherWing helps you check whether it will physically and electrically fit your Feather-style mainboard.
- GND
- GND is the ground or reference connection (0 V) for a circuit. When connecting two devices together, their grounds must be joined so both agree on what counts as a low or high signal.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Prototyping & Wiring
Related Tutorials
Free step-by-step guides
