Adafruit
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
·
The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a si...
Get notified when back in stock
The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four directional photodiodes to detect reflected IR energy, enabling both distance measurement and directional gesture recognition.
The breakout includes a 3.3V regulator and level shifting for use with 3.3V or 5V microcontrollers. A configurable interrupt pin can fire when proximity or colour thresholds are exceeded.
Key Features
- Gesture Recognition – Detects left, right, up and down gestures (more complex gestures possible with additional code)
- Proximity Detection – 8-bit resolution distance measurement up to a few centimetres
- RGB Colour Sensing – Measures red, green, blue and clear light levels
- Ambient Light Sensing – General light intensity measurement
- Integrated IR LED – Built-in IR emitter and driver for proximity and gesture sensing
- Configurable Interrupt – Fires on proximity or colour threshold events
- I2C Interface – Simple two-wire communication
- Wide Voltage Range – 3–5V with on-board regulator and level shifting
Ideal For
- Touchless gesture control interfaces
- Proximity-activated displays or lights
- Colour detection and sorting
- Ambient light-responsive projects
Package Contents
- 1× Adafruit APDS9960 Proximity, Light, RGB and Gesture Sensor Breakout
Find this product in
Brands
You might also like
Customers who bought this also bought
GM77 Barcode and QR Code Scanning Module
$97.45
Black Nylon Screw and Stand-off Set – M3 Thread
$36.75
Light and Colour Sensor
$8.20
Temperature and Humidity Sensor Module DHT11
$5.05
4-Digit Display
$8.20
Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A
$2.25
Hobby Gearmotor - 140 RPM (Pair)
$16.30
RGB LED Module
$1.70
Jargon buster
Plain-language definitions for the technical terms in the product description.
- 3.3V regulator
- A 3.3V regulator is a power circuit that provides a steady 3.3 volts for parts that need that supply voltage. On a breakout board, it can let the sensor run safely even when the connected microcontroller or power source uses a higher voltage.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- RGB
- Short for red, green and blue, the three primary colours of light that are mixed in varying amounts to make a wide range of colours. In electronics RGB can refer to an LED or pixel that blends these three colours, or to a colour signal or interface that carries separate red, green and blue channels.