Pololu
ACS711EX Current Sensor Carrier -31A to +31A
A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up ...
Get notified when back in stock
A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred at Vcc/2. The sensor offers a very low resistance current path (~0.6 mΩ) and electrical isolation up to 100 V.
Operating from 3 V to 5.5 V, the board interfaces directly with both 3.3 V and 5 V systems without level shifting.
Key Features
- Current Range – ±31 A bidirectional
- Sensor – Allegro ACS711EX Hall effect linear current sensor
- Low Resistance – ~0.6 mΩ current path for minimal insertion loss
- Electrical Isolation – Up to 100 V between current path and sensor output
- Output – Proportional analogue voltage centred at Vcc/2, typical error ±4%
- Supply Voltage – 3 V to 5.5 V (compatible with 3.3 V and 5 V systems)
- Overcurrent Fault Output – Dedicated fault pin for protection circuits
Ideal For
- Motor current monitoring
- Overcurrent protection circuits
- Battery charging systems
- Power supply monitoring
Also Available
Package Contents
- 1× ACS711EX Current Sensor Carrier Board
Jargon buster
Plain-language definitions for the technical terms used above.
- VCC
- VCC is the positive power-supply connection on a chip or module. Connecting it to the correct supply voltage is needed for the part to power on and helps avoid damaging the electronics.
Find this product in
Brands
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
