Adafruit
4-JSTPH 6
A 4-wire cable fitted with JST-PH 4-pin female connectors on each end, approximately 150mm (6") long. These compact, latching connectors are commonly used on...
A 4-wire cable fitted with JST-PH 4-pin female connectors on each end, approximately 150mm (6") long. These compact, latching connectors are commonly used on STEMMA boards, small rechargeable battery packs, RC receivers, tiny cameras, and other small electronic devices.
The JST-PH connector clicks securely into place and stays connected even when moved around, yet is easy to insert and remove. The four wires are 26AWG stranded copper with a 2mm pitch connector.
Specifications
- Connector Type – JST-PH 4-pin female on both ends
- Pitch – 2mm
- Wire Gauge – 26AWG stranded
- Cable Length – ~150mm (6")
- Overall Dimensions – 177 × 10 × 4mm
- Weight – 2.2g
Ideal For
- Adafruit STEMMA and STEMMA QT boards
- I2C sensor connections
- Small electronics and RC projects
- Prototyping with JST-PH connectors
Package Contents
- 1× JST-PH 4-pin cable (150mm)
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- 2mm pitch
- Pitch is the distance between the centres of neighbouring pins on a connector. A 2mm pitch header is smaller than the common 2.54mm breadboard spacing, so you need matching cables and headers rather than standard breadboard jumper leads.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- pH
- A measure of how acidic or alkaline a liquid is, on a scale where 7 is neutral. For a water monitoring kit, pH tells you about water chemistry and whether the included probe matches the range and accuracy your project needs.
- STEMMA
- A plug-and-cable connection system used on some maker electronics boards to make wiring simpler. If a product uses STEMMA, you need the matching cable or connector type to plug it in without soldering.
- STEMMA QT
- A small plug-in connector system for I2C boards that lets you connect compatible sensors and controllers without soldering. It matters because it can make wiring faster and less error-prone, especially when adding several small modules to a project.
Find this product in
Prototyping & Wiring
Datasheet
Datasheet · 116.2 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
