Little Bird
100k Ohm 0.5 Watt Metal Film Resistors - Pack of 8
$0.70
|
Out of stock
A pack of 8 metal film resistors rated at 100KΩ and 0.5W. Despite the half-watt power rating, these are the same physical size as standard 1/4W carbon film r...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A pack of 8 metal film resistors rated at 100KΩ and 0.5W. Despite the half-watt power rating, these are the same physical size as standard 1/4W carbon film resistors, making them a direct drop-in replacement with double the power handling.
Key Features
- 100KΩ, 0.5W – Higher power rating in a standard-size package
- 1% Tolerance – Tight accuracy for precision circuits
- Metal Film – Lower noise and better stability than carbon film
- Through-Hole Axial – Standard breadboard and PCB compatible
Specifications
- Resistance – 100KΩ
- Tolerance – 1%
- Power Rating – 0.5W
- Type – Metal film
- Package – Axial, through-hole
- Marking – Colour code
- Leg Length – 8mm
Ideal For
- Voltage dividers and pull-up/pull-down networks
- Sensor interface circuits
- Precision analogue circuits
- Breadboard and PCB prototyping
Package Contents
- 8× 100KΩ 0.5W metal film resistors
Jargon buster
Plain-language definitions for the technical terms used above.
- Axial
- Axial components have one lead coming out of each end, so they lie flat or span holes on a circuit board or breadboard. This matters when checking whether the resistor will physically fit your prototyping or through-board assembly method.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
- through-hole
- A mounting style where the component leads pass through holes in a circuit board and are soldered on the other side. Through-hole parts are often easier to handle and solder by hand, which is useful for classroom and hobby projects.
- Tolerance
- Tolerance tells you how far the real resistance value may be from the printed value. A 1% resistor is useful when a circuit needs more predictable behaviour than a looser 5% or 10% part.
Find this product in
Related Tutorials
Free guides on learn.littlebird.com.au
