Wearables & E-textiles

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6075 | Brand: Adafruit

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy po...

SKU: SF-DEV-23387 | Brand: SparkFun

The MyoWare® 2.0 Wireless Shield is designed to take in readings from the MyoWare 2.0 Muscle Sensor and wirelessly transmit sensor data with the ESP32-WROOM! This shield also includes a built-in LiPo battery to remote...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: AF-5605 | Brand: Adafruit

These dLUX-dLITE succulent-shaped LEDs from Unexpected Labs are handcrafted decorative LEDs that look like tiny succulents when lit. Each LED is individually made, giving every piece a unique appearance — perfect for ...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5479 | Brand: Adafruit

Sure, we've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your paws on this set of kitty-shaped LEDs? These look too cute and charming and will l...

SKU: SF-DEV-18386 | Brand: SparkFun

The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away fro...

SKU: SF-DEV-18425 | Brand: SparkFun

The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...

SKU: DF-FIT0812 | Brand: DFRobot

A flexible LED filament chip that emits warm 2200K light in a full 360° pattern. At 260mm long and just 2mm in diameter, the filament can be bent and folded into any shape, making it perfect for DIY lighting decoratio...

SKU: AF-5217 | Brand: Adafruit

The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...

SKU: AF-5234 | Brand: Adafruit

An accessories kit for building a complete Adafruit LED Glasses project. Includes a chunky plastic glasses frame as a mechanical base, a STEMMA QT cable for connecting the LED panel to the driver board, a portable bat...

SKU: AF-5255 | Brand: Adafruit

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the...

SKU: AF-4560 | Brand: Adafruit

The Adafruit Soft Flexible Wire NeoPixel Strand features 50 individually addressable RGB LEDs spaced approximately 100 mm (~4") apart on soft, plated wire. Unlike traditional flexible PCB strips that can crack when be...

SKU: EF-EF10115 | Brand: ElecFreaks

This is a long flexible redcable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright redlight and the wire will not be heated. It is similar to a long thin...

SKU: AF-4330 | Brand: Adafruit

Here is the perfect kit for mounting convex lenses (glass or plastic) to your Monster M4sk! These acrylics has been laser-cut specifically for lenses with a lip-edge, so we can't guarantee it'll fit with any ol' conve...

SKU: EF-EF08196 | Brand: ElecFreaks

Power:bit button cell board is a micro expansion board in the smallest size equipped with a buzzer. It can not only supply power to the board but is also equipped with P1, P2,GND and 3V ports by the row needles, which...

SKU: PR-PIM402 | Brand: Little Bird

This handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and croc-clippable!We use this little speaker in our MINI.MU kits, and it's an ideal way to add some sound to your...

SKU: SF-SEN-15244 | Brand: SparkFun

The Bend Labs Digital Flex Sensors are an innovative solution for measuring motion, providing a unique alternative to existing sensor technologies for measuring a highly accurate and drift-free angular displacement in...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...