Wearable Sensors

SKU: AF-921 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the brace...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: AF-1458 | Brand: Adafruit

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and con...

SKU: SF-CAB-19244 | Brand: SparkFun

The MyoWare 2.0 Reference Cable extends the reference pin on the MyoWare 2.0 Muscle Sensor, allowing you to place the reference electrode on a separate part of the body. This is useful when the sensor's built-in refer...

SKU: AF-3781 | Brand: Adafruit

You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything, Collin's wondrous, mind-blowing, heart-stirring Pulse Room, and more! And you are dressed to the cyber-...

SKU: SF-DEV-13343 | Brand: SparkFun

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: SF-KIT-19627 | Brand: SparkFun

This is a 10 pack of the MyoWare® Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing...

SKU: SF-COM-11813 | Brand: SparkFun

Have you ever been listening to music on your MP3 player and a song you don’t want to listen to comes on but you don’t want to reach into your bag to change the track? The 5 Button Fabric Button Pad, from Sensing Tex,...

SKU: PL-1696 | Brand: Pololu

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: AF-4043 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains an NTAG203 chip with 144 bytes of writable EEPROM storage. It is passively powered — no battery is needed. Hold the bracelet a few centimetres from a compatible...

SKU: DF-SEN0065 | Brand: DFRobot

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the fo...