USB Cables

SKU: SF-CAB-15424 | Brand: SparkFun

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor, yet genius modifications that allow the...

SKU: AF-4055 | Brand: Adafruit

This snap-in panel mount USB A extension cable lets you run a USB port through an enclosure wall without screws or drilling mounting holes. Cut a rectangular opening in your panel, snap the connector in, and the integ...

SKU: AF-3629 | Brand: Adafruit

A solderless breakout adapter that connects a USB-A female socket to a 5-pin screw terminal block. Simply use a small screwdriver to open the terminal blocks, slide in your stranded or solid-core wire, and tighten — n...

SKU: AF-898 | Brand: Adafruit

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).Approximately 6.5" long from end to end, its a littl...

SKU: AF-936 | Brand: Adafruit

A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port t...

SKU: AF-4056 | Brand: Adafruit

This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a ...

SKU: AF-2379 | Brand: Adafruit

A USB-A to Micro-B power-only cable with a built-in inline on/off switch. Perfect for powering a Raspberry Pi or any Micro USB device from a USB power supply, with the convenience of a physical power switch — no need ...

SKU: AF-2697 | Brand: Adafruit

This USB to 2.1 mm barrel jack cable lets you power 5 V DC devices from any USB port. Simply connect the USB-A end to a computer, USB wall adapter, or USB battery pack, and the barrel jack end to your device. At 1 met...

SKU: SF-CAB-11604 | Brand: SparkFun

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited hosting capabilities! USB-OTG is common for things like tablet computers a...

SKU: SF-CAB-10215 | Brand: SparkFun

A standard USB 2.0 Type-A to Micro-B cable, 1.8 m (6 ft) in length. Micro USB is the standard connector found on a wide range of development boards, microcontrollers, and electronics accessories. Key Features USB 2...

SKU: DF-FIT0057 | Brand: DFRobot

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and port...

SKU: LB-LS7522 | Brand: Little Bird

A 30cm breakout cable with a Micro-USB plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without sold...

SKU: LB-LS3700 | Brand: Little Bird

Introducing our 3 in 1 USB Hub, the perfect solution for expanding your USB connectivity! This compact and lightweight hub features 3 USB-A ports, allowing you to connect multiple devices simultaneously. Made from dur...

SKU: SF-DEV-21247 | Brand: SparkFun

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...

SKU: AF-5652 | Brand: Adafruit

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...

SKU: DF-FIT0903 | Brand: DFRobot

The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. Feat...

SKU: WS-21358 | Brand: Waveshare

Turn an M.2 SATA SSD into a portable USB-C flash drive. This compact adapter accepts M.2 NGFF (B-key / B+M-key) SSDs and connects to any USB-C port at USB 3.2 Gen 2 speeds — up to 6 Gbps (limited by SATA III interface...

SKU: DF-FIT0784 | Brand: DFRobot

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards fro...

SKU: DF-FIT0783 | Brand: DFRobot

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing D...

SKU: AF-5216 | Brand: Adafruit

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 2 meters long, with all the pins connecting fro...