SparkFun

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: SF-PRT-10687 | Brand: SparkFun

A 33-metre roll of polyimide (Kapton-style) tape that withstands temperatures up to 258°C (496°F). This high-temperature adhesive tape is an excellent electrical insulator with good corrosion resistance, and its silic...

SKU: SF-TOL-10721 | Brand: SparkFun

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a conical type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw t...

SKU: SF-KIT-12963 | Brand: SparkFun

The SparkFun Digital Sandbox Add-On kit extends the Digital Sandbox (DS) learning platform with three additional circuit experiments. Build an electric musical instrument, control motor speed, and drive a servo — perf...

SKU: SF-WRL-12938 | Brand: SparkFun

The SparkFun FM Tuner Evaluation Board features the Silicon Laboratories Si4703 FM tuner chip, capable of receiving FM radio stations as well as detecting and processing Radio Data Service (RDS) and Radio Broadcast Da...

SKU: SF-DEV-10618 | Brand: SparkFun

The SparkFun Power Driver Shield Kit lets you switch high-current loads directly from your Arduino using six RFP30N06LE N-channel MOSFETs. Connect a computer power supply or other DC source to drive motors, solenoids,...

SKU: SF-BOK-10626 | Brand: SparkFun

Want to build your own robots, turn your ideas into prototypes, or control devices with a computer? It’s a snap with this book and the Arduino open source electronic prototyping platform. Get started with six fun proj...

SKU: SF-BOB-10616 | Brand: SparkFun

The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...

SKU: SF-SEN-12909 | Brand: SparkFun

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...

SKU: SF-COM-10594 | Brand: SparkFun

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or...

SKU: SF-BOB-12886 | Brand: SparkFun

If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breako...

SKU: SF-PRT-10550 | Brand: SparkFun

BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing

SKU: SF-WRL-10534 | Brand: SparkFun

A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...

SKU: SF-WRL-10532 | Brand: SparkFun

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...

SKU: SF-TOL-12878 | Brand: SparkFun

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way t...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-SEN-12829 | Brand: SparkFun

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 br...