SparkFun

SKU: SF-PRT-17258 | Brand: SparkFun

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...

SKU: SF-PRT-17259 | Brand: SparkFun

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...

SKU: SF-DEV-15421 | Brand: SparkFun

NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next au...

SKU: SF-SEN-15335 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...

SKU: SF-KIT-15081 | Brand: SparkFun

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to u...

SKU: SF-COM-09312 | Brand: SparkFun

The US1881 is a latching Hall effect sensor in a TO-92 package. When exposed to a magnetic field above the operating threshold, the open-collector output latches LOW and stays there until a reversed magnetic field pul...

SKU: SF-DEV-14012 | Brand: SparkFun

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-te...

SKU: SF-PRT-12002 | Brand: SparkFun

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separa...

SKU: SF-BOB-00716 | Brand: SparkFun

RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an...

SKU: SF-BOB-11570 | Brand: SparkFun

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connect...

SKU: SF-COM-11452 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: SF-COM-11275 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-COM-11274 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-DEV-10899 | Brand: SparkFun

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Ea...

SKU: SF-PRT-10811 | Brand: SparkFun

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and...

SKU: SF-COM-12986 | Brand: SparkFun

We know these look like a lot of our other LEDs, but they’re not! These are PTH Addressable RGB LEDs with a WS2812 control IC built right into the them. This PTH version is incredibly similar to its SMD cousin, except...

SKU: SF-ROB-10398 | Brand: SparkFun

This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts. F...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: SF-PRT-08430 | Brand: SparkFun

Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be instal...

SKU: SF-WRL-18087 | Brand: SparkFun

This adhesive, dual band antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating on the 2.4GHz or 5.8GHz band, it works great fo...