SparkFun

SKU: SF-DEV-15316 | Brand: SparkFun

Control up to 16 servo motors from your Raspberry Pi over I2C with the SparkFun Servo pHAT. By using I2C for PWM generation, this HAT keeps all your GPIO pins free for other tasks. It also provides a serial terminal c...

SKU: SF-CAB-15428 | Brand: SparkFun

A USB 2.0 Type-A to Micro-B cable with reversible connectors on both ends. No more fumbling with orientation — both the USB-A and Micro-B plugs insert correctly either way up, bringing USB-C convenience to your Micro-...

SKU: SF-PRT-15217 | Brand: SparkFun

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this iteration, we've changed the input charge connector to USB-C and prov...

SKU: SF-COM-15208 | Brand: SparkFun

The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take an input voltage of anywhere from 3-16V which can then...

SKU: SF-PRT-15315 | Brand: SparkFun

A small plastic jig for bending 5 mm LED legs to a right angle, allowing you to mount LEDs sideways on a PCB. Simply insert a standard 5 mm two-leg LED into the holder, bend the leads over, and solder it to your board...

SKU: SF-PRT-15307 | Brand: SparkFun

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or just a custom input for your computer Cherry MX switches give you that ...

SKU: SF-TOL-15295 | Brand: SparkFun

One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes, t...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: SF-SEN-14599 | Brand: SparkFun

The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers accurate range measurements from 5 cm to 40 m, making it an ide...

SKU: SF-SEN-14571 | Brand: SparkFun

It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...

SKU: SF-ROB-14760 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 p...

SKU: SF-KIT-14719 | Brand: SparkFun

Do you own a micro:bit or micro:bit Go Bundle and want to expand your skills with the new microcontroller? You are in luck! The SparkFun Inventor’s Kit Bridge Pack for micro:bit was designed to provide you with a...

SKU: SF-COM-14977 | Brand: SparkFun

A convenient pack of 20 assorted 5mm LEDs with built-in resistors — no need to calculate or add external current-limiting resistors. Simply connect to 3.0–5.0V and you're ready to go, making these perfect for quick pr...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: SF-COM-15036 | Brand: SparkFun

The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good a...

SKU: SF-DEV-13820 | Brand: SparkFun

The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit i...

SKU: SF-COM-14889 | Brand: SparkFun

A replacement knob for small and medium sized linear slide potentiometers. The knob attaches via friction fit onto the slide pot's slider, providing a more comfortable and precise control surface for your project. Ke...

SKU: SF-COM-14561 | Brand: SparkFun

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out ...

SKU: SF-COM-14562 | Brand: SparkFun

Blue 5 mm LEDs with a built-in current-limiting resistor. No external resistor needed — simply connect to 3.0–5 V and the integrated resistor prevents burnout. Packaged in reusable ESD-safe bags. Specifications Siz...