SparkFun

SKU: SF-SEN-10127 | Brand: SparkFun

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and w...

SKU: SF-BOB-10124 | Brand: SparkFun

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...

SKU: SF-ROB-12608 | Brand: SparkFun

These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: SF-ROB-12607 | Brand: SparkFun

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: SF-CAB-10087 | Brand: SparkFun

The OBD-II to DB9 Cable connects your vehicle's OBD-II diagnostic port to a DB9 female serial connector, providing access to automotive bus protocols for diagnostics, data logging, and vehicle hacking projects. The c...

SKU: SF-PRT-12590 | Brand: SparkFun

This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the female. Now you have the ability to get both! Pins have 0.1" spacin...

SKU: SF-COM-09998 | Brand: SparkFun

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft with a set screw.

SKU: SF-ROB-12567 | Brand: SparkFun

This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something interesting (or terrible) happens. The buzzer works by making use of two I/O pi...

SKU: SF-PRT-09915 | Brand: SparkFun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector ...

SKU: SF-COM-09856 | Brand: SparkFun

A pack of 25 standard red 5 mm through-hole LEDs. Supplied in a reusable ESD-safe bag. Specifications Colour – Red Size – 5 mm through-hole Forward Voltage – ~1.8–2.2 V Forward Current – 20 mA Package Contents...

SKU: SF-COM-09773 | Brand: SparkFun

This is a 5mm PTH fuse clip intended to be used with our Glass Fuses. Note: These are sold in single units. If you intend to secure a fuse using these clips you’ll need two clips. We recommend ordering two. Part #: ...

SKU: SF-PRT-09739 | Brand: SparkFun

A red insulated binding post for connecting single-wire leads. The coloured cap screws up and down to clamp securely onto the connecting wire, and the post accepts standard banana plugs for quick, reliable connections...

SKU: SF-PRT-09740 | Brand: SparkFun

This is a black insulated binding post. These binding posts do accept banana plugs, and are a great way to connect single-wire leads. The colored cap screws up and down, and is designed to clamp on the connecting w...

SKU: SF-DEV-09717 | Brand: SparkFun

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI...

SKU: SF-SEN-09674 | Brand: SparkFun

This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area....

SKU: SF-COM-09661 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable ESD safe bag. Make that next project shine! Features: 25 ...

SKU: SF-COM-09660 | Brand: SparkFun

A bulk pack of 25 super bright red LEDs from SparkFun, perfect for stocking up your parts bin or kitting out a classroom project. Each LED comes in a reusable ESD-safe bag. These standard through-hole LEDs are ideal ...

SKU: SF-COM-09542 | Brand: SparkFun

The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...

SKU: SF-PRT-09536 | Brand: SparkFun

Looking to add MIDI to your project? This is a female, 5-pin, right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1", making these connectors eas...

SKU: SF-PRT-09498 | Brand: SparkFun

A right-angle 24-pin Molex Mini-Fit Jr. connector, the standard ATX power supply connector found on PC motherboards. Two rows of twelve pins break out to through-hole male headers for PCB mounting. Pair with a standar...