SparkFun

SKU: SF-PRT-14671 | Brand: SparkFun

You asked for more wires, so you are going to get more wires! This is a large kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG ...

SKU: SF-CAB-15186 | Brand: SparkFun

A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator cli...

SKU: SF-COM-14884 | Brand: SparkFun

A general-purpose 1N4004 rectifier diode in a subminiature axial-lead package. Rated for 1 A forward current and 400 V reverse voltage, this diode is commonly used for reverse voltage protection, power rectification, ...

SKU: SF-CAB-14911 | Brand: SparkFun

This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 ...

SKU: SF-PRT-14460 | Brand: SparkFun

This is a simple 4-pack of multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack’s tactile switches are actually recessed into the housing so they don’t ac...

SKU: SF-COM-15107 | Brand: SparkFun

For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and still dwarfs older memory systems like magnetic core memory.This card is...

SKU: SF-CAB-14576 | Brand: SparkFun

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: SF-CAB-14575 | Brand: SparkFun

These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: SF-DEV-14346 | Brand: SparkFun

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap...

SKU: SF-COM-09339 | Brand: SparkFun

This 35mm concave momentary push button delivers the satisfying tactile click of an arcade button. The screw-in design makes it easy to mount in panels and enclosures, and the included 3-terminal microswitch is rated ...

SKU: SF-COM-09338 | Brand: SparkFun

This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...

SKU: SF-TOL-09200 | Brand: SparkFun

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Exce...

SKU: SF-COM-09119 | Brand: SparkFun

A simple slide potentiometer can go a long way. Rated at 10kOhm and 0.5W. Comes with solder tab connections. The taper profile for this slide can be found in the datasheet below labeled “0B” Documents: Datasheet

SKU: SF-BOB-08688 | Brand: SparkFun

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Docu...

SKU: SF-PRT-08671 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector

SKU: SF-COM-14015 | Brand: SparkFun

A 1 m addressable RGB LED strip packed with 60 APA102C LEDs. Unlike WS2812-based strips, APA102s are controlled via a standard SPI interface and feature an extremely high PWM frequency for flicker-free dimming. Each L...

SKU: SF-COM-08377 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our b...

SKU: SF-DEV-08321 | Brand: SparkFun

The PICAXE 8 Pin Proto Kit is a beginner-friendly kit for getting started with 8-pin PICAXE microcontrollers. It includes a handful of easy-to-solder through-hole components and a proto board, making it an ideal first...

SKU: SF-DEV-13975 | Brand: SparkFun

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines a...

SKU: SF-COM-07950 | Brand: SparkFun

This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This is not a true piezoelectric speaker but behaves similarly. Inst...