SparkFun

SKU: SF-COM-08589 | Brand: SparkFun

This is a simple, very common rectifier diode. Often used for reverse voltage protection, the 1N4001 is a staple for many power, DC to DC step up, and breadboard projects. 1N4001 is rated for up to 1A/50V. If you ne...

SKU: SF-TOL-12078 | Brand: SparkFun

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now ...

SKU: SF-DEV-14013 | Brand: SparkFun

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0....

SKU: SF-COM-08374 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. Need more than one? Checkout our bag of re...

SKU: SF-PRT-00552 | Brand: SparkFun

Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.

SKU: SF-COM-00527 | Brand: SparkFun

The LM317TG is a three-terminal adjustable positive voltage regulator with an output range of 1.2V to 37V and up to 1.5A output current. Only two external resistors are needed to set the desired output voltage, making...

SKU: SF-COM-00315 | Brand: SparkFun

The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous...

SKU: SF-COM-11719 | Brand: SparkFun

Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take three different kinds of coin! Whether you’re building your own arcade cabinet or just charging adm...

SKU: SF-SEN-00246 | Brand: SparkFun

This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).

SKU: SF-WRL-00145 | Brand: SparkFun

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee,...

SKU: SF-PRT-11476 | Brand: SparkFun

This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder t...

SKU: SF-BOB-13655 | Brand: SparkFun

The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded...

SKU: SF-PRT-11417 | Brand: SparkFun

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit ...

SKU: SF-PRT-11375 | Brand: SparkFun

An assortment of colored wires: you know it’s a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on your workbench and stop worrying about having a piece of wire around!Fea...

SKU: SF-PRT-11376 | Brand: SparkFun

A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a s...

SKU: SF-DEV-11364 | Brand: SparkFun

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s...

SKU: SF-COM-11273 | Brand: SparkFun

This large 100 mm yellow dome pushbutton is hard to miss and satisfying to press. It features a built-in LED indicator, a pre-installed long-life microswitch, and a polycarbonate lens cap for optical clarity. The heig...

SKU: SF-COM-11143 | Brand: SparkFun

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  Th...

SKU: SF-COM-13153 | Brand: SparkFun

This IC test clip provides a secure, hands-free connection to all eight leads of a small outline integrated circuit (SOIC-8). Gold-plated upper and lower contacts ensure reliable electrical connections for testing and...

SKU: SF-PRT-10898 | Brand: SparkFun

A pack of 100 premium female-to-female jumper wires, 155 mm long. Use these to connect any male header to another male header on breadboards, development boards, and breakout modules. Multiple jumpers can be installed...