SparkFun

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: SF-SEN-13285 | Brand: SparkFun

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.This unit works great from 5...

SKU: SF-BOB-13282 | Brand: SparkFun

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...

SKU: SF-PRT-11214 | Brand: SparkFun

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...

SKU: SF-COM-10468 | Brand: SparkFun

The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...

SKU: SF-ROB-09454 | Brand: SparkFun

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...

SKU: SF-BOB-28467 | Brand: SparkFun

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 ...

SKU: SF-WRL-28434 | Brand: SparkFun

The SparkFun IoT RedBoard combines the powerful ESP32-D0WDQ6 microcontroller with MicroPython pre-installed, letting you start coding IoT projects right out of the box. No need for complex toolchains – just connect vi...

SKU: SF-SEN-24805 | Brand: SparkFun

The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...

SKU: SF-GPS-21305 | Brand: SparkFun

The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated...

SKU: SF-ROB-22727 | Brand: SparkFun

The SparkFun XRP Controller is the brain of the Experiential Robotics Platform (XRP), a hands-on educational robotics system designed for middle and high school students. Built around a Raspberry Pi Pico W, it provide...

SKU: SF-COM-23946 | Brand: SparkFun

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. This is an EKM-series PIR sensor from Panasonic®. The EKMB-series PIR sensors are optimized for small movements to offer...

SKU: SF-DEV-22692 | Brand: SparkFun

The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with o...

SKU: SF-COM-21337 | Brand: SparkFun

The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size, 1in. x 1in. version of our buck regulator bo...

SKU: SF-COM-21338 | Brand: SparkFun

The SparkFun 1.8V Buck Regulator Breakout features the AP3429A step-down DC-DC converter, providing a regulated 1.8V output at up to 2A continuous current from a 2.7V to 5.5V input. An enable pin allows the output to ...

SKU: SF-KIT-19519 | Brand: SparkFun

The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...

SKU: SF-SEN-17372 | Brand: SparkFun

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic®. T...

SKU: SF-WRL-16781 | Brand: SparkFun

The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...

SKU: SF-PRT-17253 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy...

SKU: SF-DEV-17360 | Brand: SparkFun

The Raspberry Pi Compute Module 4 I/O board is the perfect compliment to get you started working the Compute Module 4 line. The Compute Module plugs right into the I/O Board and provides a multitude of inputs and outp...