Sensors & Input

SKU: DF-SEN0001 | Brand: DFRobot

URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...

SKU: DF-FIT0324 | Brand: DFRobot

INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. ...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: SF-ROB-12629 | Brand: SparkFun

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing relia...

SKU: SF-SEN-12617 | Brand: SparkFun

Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a ...

SKU: DF-DFR0072 | Brand: DFRobot

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8...

SKU: SF-KIT-27214 | Brand: SparkFun

This LoRaWAN® IoT kit brings together a Digi HX15 Gateway, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board to help you get a connected sensor system running quickly....

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SB-PICO-RELAY | Brand: Little Bird

The Pico 3V Relay HAT is a two-channel relay board designed for the Raspberry Pi Pico. It stacks directly onto the Pico via a female pin header for a clean, compact connection. Operating at 3.3V, it allows the Pico to...

SKU: LB-HS2344 | Brand: Little Bird

The T-Camera is a powerful and compact development board designed for camera-based IoT applications. Powered by an ESP32 dual-core processor, it combines Wi-Fi, Bluetooth, and camera functionality, making it ideal for...

SKU: AF-4007 | Brand: Adafruit

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll...

SKU: PL-2482 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 1...

SKU: PL-2462 | Brand: Pololu

The Vishay TSSP58038 is a modulated IR receiver that is designed specifically for sensing applications instead of data communication for remote control. Unlike most similar-looking units, it has a fixed gain that mak...

SKU: LB-LS4690-50CM | Brand: Little Bird

A waterproof DS18B20 digital temperature probe with a 0.5m cable and XH2.54mm connector. Ideal for monitoring temperatures in wet or harsh environments including aquariums, hydroponics, brewing, and outdoor weather st...

SKU: SB-21819 | Brand: Little Bird

The Pico Air Monitoring Expansion is a HAT for Raspberry Pi Pico that measures suspended particulate matter (PM1.0, PM2.5, and PM10) in the air. It uses a PMSA003 digital laser dust sensor and includes an onboard 0.91...

SKU: EC-SPM01021S | Brand: Elecrow

This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...

SKU: PL-1131 | Brand: Pololu

This small digital distance sensor detects objects between 0.5 cm and 5 cm (0.2″ and 2″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a...

SKU: FT-LEVEL | Brand: Freetronics

Many of the most interesting sensors and devices are only available in 3.3V or even lower voltage versions, which can be a problem if you want to connect them to a 5V microcontroller such as an Arduino. This module...

SKU: TB-XC4444 | Brand: Little Bird

A pyroelectric infrared (PIR) motion sensor module for Arduino and microcontroller projects. It detects movement from people and animals by sensing changes in infrared radiation, outputting a digital high signal when ...

SKU: PL-1135 | Brand: Pololu

This small digital distance sensor detects objects between 2 cm and 10 cm (0.8″ and 4″) away. With its quick response time, small size, and low current draw, this sensor is a good choice for non-contact obje...