Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Gravity: Arduino Hydrogen Gas Sensor (MQ8)
SKU: DF-SEN0133 | Brand: DFRobot
This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range...
Delivered by Fri 19 Jun
Fermion: MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0566 | Brand: DFRobot
Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA...
Delivered by Wed 10 Jun
Analog CO/Combustible Gas Sensor(MQ9)
SKU: EC-SES90101S | Brand: Elecrow
The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it su...
Delivered by Wed 24 Jun
Gravity: Arduino ORP Meter V1.0
SKU: DF-SEN0165 | Brand: DFRobot
In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water...
Delivered by Wed 10 Jun
SparkFun Soil Moisture Sensor (with Screw Terminals)
SKU: SF-SEN-13637 | Brand: SparkFun
A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resist...
Delivered by Fri 19 Jun
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
SKU: AF-163 | Brand: Adafruit
A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...
Delivered by Wed 10 Jun
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
SKU: DF-SEN0219 | Brand: DFRobot
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 ...
Delivered by Wed 10 Jun
DIY Gas Detector - Learn to solder
SKU: LB-LS4968 | Brand: Little Bird
MQ-2 Gas Sensor - Smoke & Flammable Gas Detector The MQ-2 is a reliable, easy-to-use gas sensor that’s ideal for detecting flammable gases like LPG, methane, propane, and even smoke. At its core is tin dioxide (SnO₂...
Delivered by Wed 10 Jun
Alcohol sensor for Arduino
SKU: LB-LR0205 | Brand: Little Bird
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...
Delivered by Wed 10 Jun
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
SKU: DF-SEN0237-A | Brand: DFRobot
This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many wa...
Delivered by Fri 19 Jun
Gravity: Arduino CO2 Gas Sensor
SKU: DF-SEN0159 | Brand: DFRobot
The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...
Delivered by Fri 19 Jun
Gravity: Arduino pH Sensor Meter Pro
SKU: DF-SEN0169 | Brand: DFRobot
This is a professional Arduino pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient , practical connection and long life (up to 1 year), which makes it very suitable for long term onli...
Delivered by Fri 19 Jun
Gravity: Analog AC Current Sensor
SKU: DF-SEN0211 | Brand: DFRobot
INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this p...
Delivered by Wed 10 Jun
Fermion: MEMS Smoke Gas Detection Sensor (Breakout, 10-1000ppm)
SKU: DF-SEN0570 | Brand: DFRobot
Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...
Delivered by Wed 10 Jun
Fermion: MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)
SKU: DF-SEN0567 | Brand: DFRobot
Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Wed 10 Jun
SparkFun Triple Axis Accelerometer Breakout - ADXL335
SKU: SF-SEN-09269 | Brand: SparkFun
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...
Delivered by Wed 10 Jun
LilyPad Accelerometer ADXL335
SKU: SF-DEV-09267 | Brand: SparkFun
The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...
Delivered by Fri 19 Jun
Gravity: Arduino LPG Gas Sensor (MQ5)
SKU: DF-SEN0130 | Brand: DFRobot
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...
Delivered by Fri 19 Jun
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
SKU: DF-SEN0134 | Brand: DFRobot
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...
Delivered by Wed 10 Jun
Gravity: Alcohol Sensor (0-5ppm)
SKU: DF-SEN0376 | Brand: DFRobot
This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air,...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
