Robotics & Motion

SKU: PL-2458 | Brand: Pololu

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line fo...

SKU: AF-2776 | Brand: Adafruit

This miniature push-pull solenoid features a captive armature with a return spring — when energised at ~5 V DC, the armature retracts, and when power is removed it springs back to its original position. The dual-actio...

SKU: PL-1046 | Brand: Pololu

The HD-1160A is an inexpensive, general-purpose miniature analog servo from Power HD. Servo horns and associated hardware are included.Key specs at 6 V: 0.11 sec/60°, 37 oz-in (2.7 kg-cm), 17 g.

SKU: SF-WIG-13118 | Brand: SparkFun

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached ser...

SKU: ED-MK-HB-1 | Brand: Edtechs

Introducing the Hover:bit - a hovercraft kit for the BBC micro:bit which you build, code and then drift drive. Hover:bit is a STEAM learning kit, which will engage students with a practical and creative way of lear...

SKU: SF-SEN-24904 | Brand: SparkFun

The SparkFun Qwiic Optical Tracking Odometry Sensor empowers you to elevate your robot's navigation capabilities with exceptional precision and streamlined integration. This compact, all-in-one sensor leverages the po...

SKU: DF-FIT0791 | Brand: DFRobot

A pack of four coreless micro motors measuring 6 × 12 mm, reaching 50,000 RPM at 3.7V. The slightly longer body compared to the 6 × 10 mm variant provides additional torque, making these motors a good balance of power...

SKU: YH-6000200156 | Brand: Little Bird

Tiny:bit is a robotic car for the micro:bit education market. It is compact, easy to assemble, and easy to move in tight spaces. The Tiny:bit smart car is based on the micro:bit development board design and uses th...

SKU: FT-ASPM | Brand: Freetronics

The ArduSat Prototyping Module is a gold-plated PCB used to hand-assemble early prototypes of the first two ArduSat satellites launched into space in 2013. A limited number remain from that original production run — o...

SKU: ED-ETS-OZO-BIT-DIY | Brand: Edtechs

Customise Bit with colourful skins, stickers, and pop-outs.Four clear skins that slip on top of Bit (sold separately), plus tons of stickers and pop-outs209 colourful DIY stickers including eyes, moustaches, bows, ins...

SKU: PL-2515 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 18v18 Shield uses pairs of discrete MOSFET H-bridges to drive two large brushed DC motors. It has an Arduino shield form factor for direct plug-in use, and also breaks out al...

SKU: AF-970 | Brand: Adafruit

Bring in some muscle to your output pins with 8 mighty Darlingtons! This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your ...

SKU: PI-COM2700 | Brand: Pimoroni

A compact push-type solenoid for ringing bells, hitting drums, pushing buttons, or flicking switches. When energised, the plunger extends with a quick push action — ideal for adding physical interactivity to your make...

SKU: EF-EF03413 | Brand: ElecFreaks

Robit is a motherboard of smart car based on micro:bit. It is compatible with MBOT. Except for the integration of the simple and convinient RJ25 connector，motor connector and sensor on MBOT, we have extended 4 DC m...

SKU: AF-1450 | Brand: Adafruit

A metal-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables ...

SKU: AF-3957 | Brand: Adafruit

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted Neo...

SKU: PL-2692 | Brand: Pololu

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older version for all applications that are not somehow specifically tied to the ...

SKU: PL-2682 | Brand: Pololu

A pair of aluminium adapters that convert a 3 mm diameter motor shaft to a 12 mm hex output, compatible with standard hobby RC wheels. Each adapter is 17 mm long and secured to the shaft with M3 set screws for a firm ...

SKU: AF-154 | Brand: Adafruit

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different h...

SKU: TB-XC4472 | Brand: Little Bird

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A ...