Robotics & Motion

SKU: SF-ROB-14450 | Brand: SparkFun

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-bra...

SKU: PI-COM0811 | Brand: Pimoroni

A miniature brushed DC motor with an 11:1 metal gearbox, fitted with a solderless push header shim for easy prototyping — no soldering required. Simply connect with jumper wires and you're ready to go. The compact for...

SKU: PI-COM0809 | Brand: Pimoroni

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80m...

SKU: EF-EF08195 | Brand: ElecFreaks

*note colour may varyLearning about electronics and programming can be simple and fun! The Robit Smart Car is an ideal starting point for those new to electronics and programming. This gentle introduction to robo...

SKU: AF-3874 | Brand: Adafruit

This 5V electromagnet provides 10kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it perfect for controllabl...

SKU: KI-5612 | Brand: Kitronik

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can...

SKU: LB-LR0157 | Brand: Little Bird

The Sharp GP2Y0A710K0F IR Range Sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 100cm to 550cm. The interface is 5-wire with power, ground and out...

SKU: MR-BAR | Brand: Modular Robotics

This cubelet displays the block’s value as a light-up bar graph. The value is normalized to the number of points on the bar graph so that a maximum value results in a fully-lit bar graph. Cubelets are magneti...

SKU: MR-BLUETOOTH | Brand: Modular Robotics

The Bluetooth Cubelet contains a tiny Bluetooth radio that you can pair with your Android device or PC. With the Cubelets Control app running on your Android device, you can override Action Cubelets and remote control...

SKU: MR-CB-KT-DRIVE-1 | Brand: Modular Robotics

The Drive Cubelet is an action block in the Cubelets robot construction system. It contains a motor and roller wheels that move along a horizontal surface — higher input values drive it faster, while a value of zero b...

SKU: MR-CB-KT-BATTERY-1 | Brand: Modular Robotics

The Battery Cubelet provides energy to power a construction. It contains two rechargeable batteries and a small power switch. The batteries are removed from the Cubelet for charging, so if you keep a few batt...

SKU: MR-CB-KT-PASSIVE-1 | Brand: Modular Robotics

The Passive Cubelet is a basic building block. It carries power and data from its neighbors, but it basically acts like a smart brick. It doesn’t move, sense, or change the data in any way. Cubelets are magnetic...

SKU: MR-CB-KT-KNOB-1 | Brand: Modular Robotics

The Knob Cubelet has a potentiometer embedded in one of its faces. It outputs a 0 when turned fully counterclockwise, and a 1 when turned clockwise. Cubelets are magnetic blocks that can be snapped together to m...

SKU: DF-SEN0014 | Brand: DFRobot

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...

SKU: DF-ROB0021 | Brand: DFRobot

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two ...

SKU: DF-FIT0004 | Brand: DFRobot

A black anodised pan-and-tilt assembly designed for horizontal surface mounting. Built using two DFRobot servo brackets, this kit provides two axes of rotation for cameras, sensors, or other payloads on small robots a...

SKU: PL-2510 | Brand: Pololu

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such...

SKU: DF-ROB0142 | Brand: DFRobot

The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in c...

SKU: DF-FIT0037 | Brand: DFRobot

This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12...

SKU: DF-FIT0277 | Brand: DFRobot

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA u...