Robotics & Motion

SKU: SF-COM-00100 | Brand: SparkFun

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The c...

SKU: PL-1094 | Brand: Pololu

A miniature low-power 6V brushed DC gearmotor with a 297.92:1 metal gearbox. With a 10 × 12mm cross section, this micro metal gearmotor delivers useful torque in an extremely compact form factor. The D-shaped output s...

SKU: PL-1011 | Brand: Pololu

These adapters connect 3mm hexagonal shafts — the type found on many Tamiya gearboxes — to LEGO's range of wheels. A simple way to combine Tamiya-driven motors with LEGO's extensive wheel selection for custom robotics...

SKU: PL-993 | Brand: Pololu

A miniature low-power brushed DC motor with a 29.86:1 metal gearbox, designed for robotics and compact mechanical projects. The 6V LP (Low Power) variant draws minimal current while delivering useful torque through th...

SKU: PL-957 | Brand: Pololu

This ball caster was originally released as a replacement part for the 3pi robot, but the 1/2″ ball can also be used a replacement part for the newer 3pi+ robot, which has the housing for the ball built directly into ...

SKU: AF-444 | Brand: Adafruit

Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...

SKU: SF-ROB-10455 | Brand: SparkFun

The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation i...

SKU: SF-ROB-10391 | Brand: SparkFun

A linear push-type solenoid rated for 36 V DC that also works well at 12 V. Solenoids produce linear motion for pushing, pulling, or actuating switches and levers. This unit has a measured throw of approximately 10 mm...

SKU: SF-ROB-10335 | Brand: SparkFun

This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis posit...

SKU: DF-FIT0485 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*210...

SKU: SF-ROB-12608 | Brand: SparkFun

These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: SF-ROB-12607 | Brand: SparkFun

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: SF-ROB-12567 | Brand: SparkFun

This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something interesting (or terrible) happens. The buzzer works by making use of two I/O pi...

SKU: SF-ROB-09454 | Brand: SparkFun

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...

SKU: SS-114991884 | Brand: Seeed Studio

The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car in...

SKU: SU-9GMETALSERVO | Brand: Little Bird

Product descriptionTest Environment StandardEvery characteristic of the inspect must be normal temperature and humidity carry out the test,temperature 25±5℃ and relative humidity 65±10% of judgment made in accordance...

SKU: EF-EF08436 | Brand: ElecFreaks

The ELECFREAKS micro:bit Nezha Pro Ocean Kit is an ocean-themed STEM education kit that guides students through Ian's ocean adventure storyline with a project-based learning approach. Using electronic components and b...

SKU: LB-LS7538 | Brand: Little Bird

A sturdy metal mounting bracket for servos, providing a stable platform for robotics and motion projects. Precision-cut mounting holes ensure secure servo installation for joints, linkages, arms, and custom assemblies...

SKU: KI-5698 | Brand: Kitronik

A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, ov...

SKU: EF-EF05070 | Brand: ElecFreaks

The ELECFREAKS Nezha Pro is a micro:bit expansion board designed for education and creative programming. It features a 4-way motor driver, 8 sensor expansion ports, and two built-in motor control buttons that work eve...