Raspberry Pi

SKU: LB-RPI3-GPIO-REFERENCE | Brand: Little Bird

The Raspberry Pi 3 GPIO Reference Card made by Little Bird (Australia) makes it quick and easy to understand what pins do what on your RPI3. Although it's called the" Raspberry Pi 3 GPIO reference" is also works wi...

SKU: DF-DFR0836 | Brand: DFRobot

Note: The product not inclueded Raspberry Pi Pico. This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners to quick...

SKU: LB-LR0120 | Brand: Little Bird

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pi...

SKU: DF-FIT0992 | Brand: DFRobot

This is an uninterruptible power supply (UPS) expansion board specifically designed for Raspberry Pi 5 Single Board Computer. It can be used as a mobile power supply, providing a stable 5V output with a maximum of 5A....

SKU: WS-13857 | Brand: Waveshare

A 7-inch IPS HDMI display with case from Waveshare, featuring 1024×600 hardware resolution (configurable up to 1920×1080 via software). The toughened glass capacitive touch panel (6H hardness) provides smooth 5-point ...

SKU: AF-4863 | Brand: Adafruit

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from i...

SKU: EC-ACC00702A | Brand: Elecrow

This Micro-HDMI to HDMI Adapter will perfectly match the output port of the raspberry pi 4! It will provide you a better video transmission experience. Also, this adapter can be used to connect the electronic equipmen...

SKU: AF-4399 | Brand: Adafruit

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, whi...

SKU: AF-1730 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the conne...

SKU: WS-22311 | Brand: Waveshare

HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstep...

SKU: LB-00015 | Brand: Little Bird

This 7" LCD HDMI touchscreen display features 800×480 resolution with capacitive touch control. It works with Raspberry Pi, Banana Pi, and Banana Pro, and can also serve as a general-purpose HDMI monitor for any compu...

SKU: LB-LR0387 | Brand: Little Bird

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable&...

SKU: WS-27670 | Brand: Waveshare

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5 / CM 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is po...

SKU: WS-19343 | Brand: Waveshare

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...

SKU: RP-RP2040 | Brand: Raspberry Pi Ltd

The RP2040 is Raspberry Pi's first microcontroller chip, featuring dual ARM Cortex-M0+ cores running at up to 133 MHz. Built on a 40 nm process in a compact 7 × 7 mm QFN-56 package, it delivers high performance at low...

SKU: WS-26415 | Brand: Waveshare

This aluminium heatsink is designed specifically for the Raspberry Pi 5, aligning with its board dimensions and mounting holes for a precise fit. Made from lightweight aluminium with good thermal conductivity, it draw...

SKU: EC-DRD16013D | Brand: Elecrow

A 10.1" IPS touchscreen monitor in a metal enclosure with built-in loudspeaker, designed for use with the Raspberry Pi and Windows PCs. The Raspberry Pi can be mounted to the back of the screen and powered directly fr...

SKU: LB-LR-DIGI-TEMP-1M-UA | Brand: Little Bird

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboa...

SKU: EC-DTR61173K | Brand: Elecrow

This starter kit comes with the main components such as LCD1602 display,Step motor,Servo,Remote, touch sensor and Ultrasonic distance sensor, you can make some funny little builds by these things. We will provide d...

SKU: AF-3252 | Brand: Adafruit

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top th...