Raspberry Pi

SKU: AF-2420 | Brand: Adafruit

A slim, high-quality HDMI cable measuring just 450mm (1.5 feet) long with a ultra-thin ~4mm diameter. Designed to connect two HDMI devices together while staying out of the way in tight spaces and tidy setups. Featur...

SKU: PL-1634 | Brand: Pololu

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires on...

SKU: AF-2524 | Brand: Adafruit

This high-power RGB LED from Adafruit delivers serious brightness, with each red, green, and blue die capable of handling 350–750mA continuous current (2A peak). At 3W it produces approximately 150 lumens, scaling up ...

SKU: AF-2711 | Brand: Adafruit

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderl...

SKU: AF-2738 | Brand: Adafruit

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘As...

SKU: SF-CAB-14274 | Brand: SparkFun

This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor or TV. Heck, you can hook up anything you want with it! Mini HDMI is not that commo...

SKU: DF-FIT0223 | Brand: DFRobot

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. T...

SKU: SF-SEN-08880 | Brand: SparkFun

The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fa...

SKU: DF-SEN0139 | Brand: DFRobot

This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them. You just need an additional IC (Like an AD595) ...

SKU: SF-SEN-13835 | Brand: SparkFun

The SST Liquid Level Sensor provides single-point liquid detection via a TTL-compatible push/pull output. Its miniature optical design allows installation in tight spaces where traditional float switches won't fit. A...

SKU: AF-62 | Brand: Adafruit

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things).3 feet / 1 meter longColor may vary!

SKU: SF-SEN-11574 | Brand: SparkFun

Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be ...

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: DF-SEN0168 | Brand: DFRobot

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurem...

SKU: AF-3120 | Brand: Adafruit

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket to Terminal Block Breakout. You get a nice solid PCB with an HDMI socket and two strips of terminal blocks that you can use with stra...

SKU: AF-3121 | Brand: Adafruit

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket Breakout. You get a nice solid PCB with an HDMI socket that you can solder to assemble your own wiring jigs. You can add in s...

SKU: DF-DFR0330 | Brand: DFRobot

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry a...

SKU: DF-DFR0228 | Brand: DFRobot

The RC Air Mouse and Keyboard uses the latest 2.4GHz wireless technology with a sampling frequency up to 120Hz. Use it like a Wii remote to control your mouse cursor on the screen. Operation is flexible and smooth ...

SKU: AF-3195 | Brand: Adafruit

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi.  The Blinkt! provides a wash or controllable ...

SKU: AF-374 | Brand: Adafruit

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontro...