Raspberry Pi

SKU: SF-COM-11405 | Brand: SparkFun

This 20mm 4-digit 7-segment display in red is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one d...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: AF-3119 | Brand: Adafruit

This HDMI plug breakout board lets you create custom HDMI cables or tap into individual HDMI pins for specialised wiring setups. The solid PCB features an HDMI plug with through-hole pads for soldering your own connec...

SKU: AF-395 | Brand: Adafruit

An 8-channel bidirectional logic level converter breakout based on the TXB0108 chip. This converter automatically detects signal direction, eliminating the need for direction control pins. It shifts between virtually ...

SKU: AF-3239 | Brand: Adafruit

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing selectable regulated DC output (5V, 9V, or 12V) at up to 1A alongside a standard Ethernet data connection. A DIP swit...

SKU: AF-3413 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...

SKU: SF-COM-09479 | Brand: SparkFun

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a stagge...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: AF-3589 | Brand: Adafruit

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, g...

SKU: WS-31418 | Brand: Waveshare

A 12.3-inch IPS touch display with a 720×1920 portrait-mode resolution that connects directly via DSI (Display Serial Interface). The 10-point capacitive touch panel uses I2C, and the toughened glass with optical bond...

SKU: DF-SEN0636 | Brand: DFRobot

The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...

SKU: DF-DFR1211 | Brand: DFRobot

Introduction The Raspberry Pi Compute Module 5 IO Board (CM5IO) is a powerful development platform designed to integrate the Compute Module 5 (CM5) into industrial and embedded applications. Offering extensive connect...

SKU: DF-FIT1014 | Brand: DFRobot

The official Raspberry Pi IO Case is a two-piece sheet metal enclosure for the Compute Module 5 and CM5 IO Board. It provides space for accessories such as an M.2 SSD or PoE+ HAT+, includes slots for CSI-2 cameras and...

SKU: DF-TEL0185 | Brand: DFRobot

Introduction RainbowLink is a high-performance USB protocol converter designed for multi-channel serial communication and power output, making it ideal for IoT and industrial applications. It integrates four independe...

SKU: DF-SEN0610 | Brand: DFRobot

##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...

SKU: DF-DFR0550-V2 | Brand: DFRobot

A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare su...

SKU: DF-DFR0959 | Brand: DFRobot

Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation inst...

SKU: AF-6036 | Brand: Adafruit

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforwa...

SKU: AF-5967 | Brand: Adafruit

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...

SKU: AF-5907 | Brand: Adafruit

The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...