Raspberry Pi

SKU: AF-2028 | Brand: Adafruit

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: WS-21022 | Brand: Waveshare

The Waveshare 10.1" HD Capacitive Touch Screen LCD (G) delivers sharp visuals with a 1920×1200 IPS panel at 60Hz and 10-point capacitive touch. The optically bonded toughened glass panel (6H hardness) provides excelle...

SKU: PH-ZP-0172 | Brand: PiHut

The Mini Tower Kit from 52Pi is an all-in-one enclosure for the Raspberry Pi 5, featuring an LED ICE Tower cooler, 0.96" OLED display, sturdy ABS frame, and full port access. An updated design based on customer feedba...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: PR-PIM580 | Brand: Little Bird

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a com...

SKU: PI-CAB0307 | Brand: Pimoroni

This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is t...

SKU: AF-1566 | Brand: Adafruit

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but...

SKU: PR-PIM557 | Brand: Little Bird

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to th...

SKU: LB-LS7008-R | Brand: Little Bird

Some inputs deserve more than a keycap. The Big Game Button is a 100mm red dome button mounted in a tough plastic desktop enclosure, made to be slapped, smashed and enthusiastically buzzed, whether that's on a quiz ta...

SKU: PR-PIM551 | Brand: Little Bird

Scoring very highly in the Pimoroni "things on our desk that make people say ooo" rankings, RGB Keypad Base equips a Pico with an eye-catching 4x4 silicone keypad, fully loaded with addressable APA102 LEDs so that ...

SKU: AF-4823 | Brand: Adafruit

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board...

SKU: AF-5302 | Brand: Adafruit

The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector...

SKU: RP-SC0038 | Brand: Raspberry Pi Ltd

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short ...

SKU: PH-103393 | Brand: PiHut

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak)...

SKU: PI-PIM725 | Brand: Pimoroni

The Pimoroni Presto is an RP2350-powered desktop companion featuring a 4" square touchscreen IPS display, elegant black aluminium stand, and RGB backlighting. Fully programmable with MicroPython or C/C++, it's designe...

SKU: DF-DFR0924 | Brand: DFRobot

A terminal block expansion board for the Raspberry Pi Pico, designed for makers who prefer screw-terminal connections over soldering or breadboard wiring. Every Pico pin is broken out to a labelled terminal block, pro...

SKU: WS-21707 | Brand: Waveshare

A 4G/3G/2G communication HAT for Raspberry Pi featuring the SIM7600G-H module with LTE CAT4 speeds and global band coverage. Connect it to a Raspberry Pi, Jetson Nano, or PC via USB to enable high-speed cellular netwo...

SKU: LB-LR0363 | Brand: Little Bird

This SNES-style USB controller brings classic retro gaming controls to your PC, Mac, or Raspberry Pi. Plug it in and use it with your preferred emulation software to play all your favourite retro games with an authent...