Raspberry Pi

SKU: AF-4928 | Brand: Adafruit

A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or J...

SKU: EC-RPA01416L | Brand: Elecrow

This RGB LED HAT adds a 4×8 matrix of individually addressable RGB LEDs to your Raspberry Pi. With 256 brightness levels and 24-bit colour depth (over 16.7 million colours), it's perfect for creating colourful display...

SKU: EC-CEF02096C | Brand: Elecrow

If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI...

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: DF-FIT0979 | Brand: DFRobot

##Introduction A dual-fan metal case designed specifically for Raspberry Pi 5, made of aluminum alloy material. It fits perfectly with the Raspberry Pi, providing effective protection for the mainboard. Additionally, ...

SKU: WS-25270 | Brand: Waveshare

A 7-inch IPS capacitive touchscreen display with a DSI interface, designed for Raspberry Pi. Features 800×480 resolution, 170° wide viewing angle, and 5-point touch with a toughened glass panel (6H hardness). Availabl...

SKU: WS-24760 | Brand: Waveshare

A compact uninterruptible power supply (UPS) module that supports simultaneous charging and power output. When external power is connected, it charges the batteries while providing a stable 5V output. If external powe...

SKU: AF-5244 | Brand: Adafruit

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...

SKU: AF-5103 | Brand: Adafruit

Complete the look of your Adafruit MacroPad RP2040 with this enclosure and hardware add-on pack. It includes a decorative bottom plate, a mechanical keyboard stabiliser plate, a rotary encoder knob, mounting screws, a...

SKU: AF-5056 | Brand: Adafruit

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory in...

SKU: AF-4377 | Brand: Adafruit

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like P...

SKU: DF-DFR0528 | Brand: DFRobot

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain peri...

SKU: AF-4302 | Brand: Adafruit

The official Raspberry Pi Micro HDMI to Standard HDMI cable features quality overmoulding with the Pi logo and moulded grips for easy installation. At 1 metre long, it's the perfect length for desktop setups with the ...

SKU: AF-2144 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the co...

SKU: EC-RPA00273R | Brand: Elecrow

This handy Three Wire Display Stand is made for Raspberry Pi, but also can adapt to other tablet PC, such as iPad. It is great for general electronics & TFT holding. You can adjust the angle as you like. Features ...

SKU: AF-1785 | Brand: Adafruit

A medium surface transducer that turns any flat surface — tables, walls, panels — into a speaker. Unlike traditional cone speakers, a voice coil wrapped around a metal rod causes vibration that transfers directly to t...

SKU: AF-3610 | Brand: Adafruit

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in anoth...

SKU: WS-22758 | Brand: Waveshare

A 3-inch four-colour e-paper display module from Waveshare, capable of displaying red, yellow, black, and white. With ultra-low power consumption and a wide viewing angle of over 170°, the display retains its content ...

SKU: WS-18549 | Brand: Waveshare

Low-Profile ICE Tower Cooling Fan For Raspberry Pi 4B/3B+/3B, 5mm Copper Tube, Colorful LED Specifications SUPPORTED PI | Raspberry Pi 4B/3B+/3BPOWER SUPPLY | DC 5V input (can be powered from Raspberry Pi)STRUCTURE | ...