Raspberry Pi

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: DF-DFR1170 | Brand: DFRobot

The DFRobot 10.5" LED Touch Portable Monitor delivers crisp 1920×1280 visuals on an IPS panel with LED backlighting, 400 cd/m² brightness, and a 1500:1 contrast ratio. The fully laminated 10-point capacitive touch scr...

SKU: AF-5757 | Brand: Adafruit

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids...

SKU: DF-DFR1211 | Brand: DFRobot

Introduction The Raspberry Pi Compute Module 5 IO Board (CM5IO) is a powerful development platform designed to integrate the Compute Module 5 (CM5) into industrial and embedded applications. Offering extensive connect...

SKU: WS-29616 | Brand: Waveshare

Protect Your Creative Projects with the Interface Protection Adapter Board for Raspberry Pi Compute ModulesUnleash the full potential of your Raspberry Pi projects without the fear of wear and tear on your hardware! O...

SKU: WS-30489 | Brand: Waveshare

The Mini Base Board (A) is a compact carrier board designed for the Raspberry Pi Compute Module 5 (CM5). It supports all CM5 variants — both Lite and eMMC — and provides a rich set of interfaces including dual HDMI ou...

SKU: WS-30581 | Brand: Waveshare

Elevate Your Raspberry Pi Projects with the Versatile Nano Base Board (B) for Compute Module 5Unleash the full potential of your Raspberry Pi Compute Module 5 (CM5) with the compact yet powerful Nano Base Board (B). D...

SKU: DF-DFR1045 | Brand: DFRobot

The DFRobot 15.6" IPS capacitive touch display is designed for single-board computers, mini PCs, and industrial HMI applications. It features a 1920×1080 resolution panel with optical bonding and anti-glare surface tr...

SKU: SF-PRT-25761 | Brand: SparkFun

A compact aluminium heatsink with self-adhesive backing for easy peel-and-stick installation. Efficiently draws heat away from electronic components including ICs, voltage regulators, and processor chips to promote op...

SKU: AF-5785 | Brand: Adafruit

The Adafruit CSI/DSI Cable Adapter Thingy converts between the 15-pin 1.0mm pitch camera/display connector found on full-size Raspberry Pi boards and the 22-pin 0.5mm pitch connector used on the Pi Zero and CM4 develo...

SKU: AF-5447 | Brand: Adafruit

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for lapto...

SKU: DF-DFR1193 | Brand: DFRobot

The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...

SKU: SF-BOB-28468 | Brand: SparkFun

Connect your RP2350-based board or Raspberry Pi 5 to a standard HDMI monitor using this HSTX to DVI breakout. The board translates the 22-pin HSTX display interface to an HDMI connector for DVI output, making it easy ...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: WS-30915 | Brand: Waveshare

Enhance your Raspberry Pi Compute Module 5's capabilities with our cutting-edge Mini Dual Gigabit Ethernet Base Board/Mini-Computer Kit – the perfect companion for all variants of CM5, enabling a wide array of network...

SKU: WS-29307 | Brand: Waveshare

Enhance your Raspberry Pi project with the Nano Base Board (A) – the indispensable companion for the powerful Raspberry Pi Compute Module 5 (CM5). Boasting the same footprint as the CM5, this compact base board is mor...

SKU: DF-FIT1015 | Brand: DFRobot

Introduction The Raspberry Pi Cooler for the Compute Module 5 is a passive heatsink designed to enhance heat dissipation, improving CPU performance while also protecting the module from mechanical damage. A layer of t...

SKU: DF-DFR1178 | Brand: DFRobot

The DFRobot 15.6" Portable 4K OLED Touch Display features a Samsung OLED panel with 3840×2160 resolution, delivering exceptional colour accuracy with 100% DCI-P3 and 100% Adobe RGB coverage. With 829 million self-lumi...

SKU: RP-RP2040-500 | Brand: Raspberry Pi Ltd

The RP2040 is Raspberry Pi's dual-core Arm Cortex-M0+ microcontroller in a compact 7mm × 7mm QFN-56 package. Built on 40nm silicon, it delivers high performance for integer workloads with flexible I/O for connecting t...

SKU: SF-SEN-21334 | Brand: SparkFun

This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12. The lens produces a 5MP picture with a 18° field of view in a 1in image format and is easily interchangeable using the th...