Raspberry Pi

SKU: PR-PIM086 | Brand: Little Bird

A laser-cut acrylic base plate that replaces the bottom layer of a Pibow case, adding a secure mounting area for breadboard prototyping alongside your Raspberry Pi. Compatible with Raspberry Pi 3, A+, Zero, and Zero W...

SKU: AF-1484 | Brand: Adafruit

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output...

SKU: AF-3415 | Brand: Adafruit

We've got to hand it to the Pi Foundation - adding a camera port and built-in WiFi to the already awesome Pi Zero was a brilliant move. Now you can add one of the awesome Raspberry Pi cameras to your Pi Zero W t...

SKU: AF-1551 | Brand: Adafruit

You're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineeri...

SKU: AF-1658 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This h...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1539 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-2714 | Brand: Adafruit

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as ...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: AF-245 | Brand: Adafruit

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of mic...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: DF-DFR0327 | Brand: DFRobot

The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-2098 | Brand: Adafruit

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The...

SKU: AF-3563 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: PR-PIM013 | Brand: Little Bird

The PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs. You can use it for all sorts of things! And of course, it fits inside a Pibow! Works just fine with all models ...

SKU: RP-SC0339G | Brand: Raspberry Pi Ltd

A 64GB Class 10 MicroSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. Simply insert the card into your Raspberry Pi, power on, and choose from a selection of operating syste...

SKU: WS-32576 | Brand: Waveshare

Industrial-Grade 6-Channel RP2350 Relay Module – Versatility Meets RobustnessEnhance your industrial automation systems with the unparalleled reliability and flexibility of our Industrial 6-Channel RP2350 Relay Module...

SKU: WS-29616 | Brand: Waveshare

Protect Your Creative Projects with the Interface Protection Adapter Board for Raspberry Pi Compute ModulesUnleash the full potential of your Raspberry Pi projects without the fear of wear and tear on your hardware! O...