Prototyping

SKU: LB-LS5179-5 | Brand: Little Bird

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless ele...

SKU: LB-LS7241 | Brand: Little Bird

A flexible double-sided prototyping board measuring 6×8cm. The bendable PCB material allows you to fit circuits into curved enclosures or unconventional spaces where rigid boards won't work. Key Features Flexible M...

SKU: SF-BOB-28467 | Brand: SparkFun

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 ...

SKU: AF-6020 | Brand: Adafruit

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin mai...

SKU: AF-6001 | Brand: Adafruit

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more gue...

SKU: SF-DEV-27876 | Brand: SparkFun

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-s...

SKU: SF-DEV-27877 | Brand: SparkFun

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when wor...

SKU: SF-BOB-29197 | Brand: SparkFun

This compact breakout makes it straightforward to connect 3.3V microcontroller projects to legacy RS232 serial equipment such as older computers, industrial machines, GPS modules and other devices using a DE9, also kn...

SKU: SF-BOB-17110 | Brand: SparkFun

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54...

SKU: AF-6495 | Brand: Adafruit

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin ...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0916-MM | Brand: DFRobot

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin ta...

SKU: SF-COM-21409 | Brand: SparkFun

This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole...

SKU: SF-KIT-15716 | Brand: SparkFun

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your ...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...

SKU: SF-PRT-08230 | Brand: SparkFun

This male polarised header is made for perfboard and PCB projects where you want a connector that can only be plugged in the correct way around.It is suitable for power connections, sensors, and general-purpose wiring...

SKU: SF-PRT-18986 | Brand: SparkFun

This is a simple 3-pin male right-angle header for through-hole PCB mounting. It is handy when you need pins to exit sideways from a board instead of straight up.The header uses the standard 0.1in pin spacing, making ...

SKU: SF-PRT-18987 | Brand: SparkFun

This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do n...

SKU: SF-PRT-22893 | Brand: SparkFun

This compact female straight header is a simple way to add a 2-pin socket connection to your PCB or prototyping project. It uses standard 0.1in spacing, making it suitable for many common maker and electronics builds....

SKU: SF-PRT-23022 | Brand: SparkFun

This is a simple 2x6 female header for making reliable board-to-board or cable-to-board connections in your electronics projects.The header is a straight PTH style part, suitable for through-hole soldering onto compat...