Prototyping

SKU: AF-5636 | Brand: Adafruit

The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontrol...

SKU: AF-5088 | Brand: Adafruit

A matching pair of 4-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-4570 | Brand: Adafruit

The Adafruit DS1841 is an I2C-controlled logarithmic digital potentiometer from Maxim with a resistance range of 3.7 kΩ to 22 kΩ across 128 tap points. Unlike linear potentiometers, the DS1841's logarithmic response c...

SKU: SF-COM-18161 | Brand: SparkFun

Although small in size, KW4-Z5F roller microswitches are rated for controlling electrical loads ranging from logic level (computer based circuits) to power duty switching (up to 16.1 A and 250 Vac). The package size o...

SKU: AF-4954 | Brand: Adafruit

For crafting your very own custom keyboard, these Kailh Brown Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a tactile keyst...

SKU: AF-4899 | Brand: Adafruit

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512...

SKU: LB-LR0335-V | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant purple when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: LB-00100 | Brand: Little Bird

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the globe.

SKU: PL-1707 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: SF-PRT-14494 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. ...

SKU: AF-1057 | Brand: Adafruit

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...

SKU: PI-COM1503 | Brand: Pimoroni

Ahhhh capacitors - the circuit builders' most reliable and trusted friend - always keen to jump in and provide stability where needed to your signals and power supply. 0.1uF - 1uF are great all-purpose bypass capac...

SKU: AF-3643 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it ...

SKU: TB-RR2774 | Brand: Little Bird

A pack of two 1 kΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specificat...

SKU: AF-1493 | Brand: Adafruit

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...

SKU: AF-1502 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel....

SKU: TB-HB6015 | Brand: Little Bird

Manufactured from ABS plastic, these jiffy boxes not only look great, they have been designed to incorporate everything our customers wanted in a constructor's box. Sizes are compliant with industry standards ...

SKU: AF-2138 | Brand: Adafruit

A compact 2-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: TB-RR0596 | Brand: Little Bird

A pack of eight 10kΩ metal film resistors rated at 0.5W (½W) with 1% tolerance. Despite the higher power rating, these resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgra...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...