Magnetic & Compass Sensors

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...

SKU: DF-SEN0183 | Brand: DFRobot

The CMPS11 is a 3rd-generation tilt-compensated magnetic compass module that combines a 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer. An onboard Kalman filter fuses gyro and accelerometer data to re...

SKU: PR-PIM376 | Brand: Little Bird

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rov...

SKU: PL-1268 | Brand: Pololu

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...

SKU: AF-6388 | Brand: Adafruit

This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics d...

SKU: AF-6489 | Brand: Adafruit

This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...

SKU: AF-6051 | Brand: Adafruit

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it ...

SKU: AF-6490 | Brand: Adafruit

This breakout carries the TMAG5273 A2, a low-power linear 3D Hall-effect sensor for measuring magnetic fields across the X, Y and Z axes. Its built-in 12-bit ADC provides axis readings over I2C, and there is also an i...

SKU: SF-SEN-25531 | Brand: SparkFun

The FGM-X series of devices are very high sensitivity magnetic field sensors operating in the ±50 microtesla range ( ±0.5 oersted). They are simple, essentially three terminal devices, operating from a single +5 volt ...