Jumpers & Wires

SKU: SF-PRT-09914 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector fo...

SKU: AF-1951 | Brand: Adafruit

These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that c...

SKU: AF-1953 | Brand: Adafruit

These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow...

SKU: DF-FIT0513 | Brand: DFRobot

A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the othe...

SKU: AF-3525 | Brand: Adafruit

Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page!This pack of ten (10) 2.54mm jumpers is ...

SKU: LB-3-JST | Brand: Little Bird

A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-s...

SKU: AF-5617 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...

SKU: SF-ROB-19223 | Brand: SparkFun

This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector, and on the other end three 30mm shrouded alligator clips....

SKU: DF-FIT0896 | Brand: DFRobot

Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatib...

SKU: DF-FIT0887 | Brand: DFRobot

A pack of two USB-A male to double alligator clip cables for supplying 5 V power from any USB port to breadboards, battery boards, and other devices without a dedicated power connector. Each cable has a red (+) and bl...

SKU: AF-5090 | Brand: Adafruit

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-4933 | Brand: Adafruit

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connecti...

SKU: LB-PT-JUMPER-KIT | Brand: Little Bird

A pack of 30 male-to-male jumper wires in three colours — 10 red (power), 10 black (ground), and 10 yellow (signal). The colour coding makes it easy to keep breadboard and prototype circuits organised and readable at ...

SKU: EF-EF11096 | Brand: ElecFreaks

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices ...

SKU: SF-CAB-15364 | Brand: SparkFun

A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. ...

SKU: AF-3835 | Brand: Adafruit

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.187" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin con...

SKU: DF-FIT0033 | Brand: DFRobot

A 300 mm (11.8″) servo extension cable for when your servo needs to reach further than its built-in lead allows. Male connector on one end plugs into your controller, female connector mates with the servo. Also works ...

SKU: LB-LR0335-O | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant orange when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: AF-4046 | Brand: Adafruit

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even...

SKU: SF-PRT-15109 | Brand: SparkFun

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adap...