Individual Components

SKU: LB-LR0040 | Brand: Little Bird

This versatile soil moisture sensor is designed for easy integration with both Arduino and Raspberry Pi projects, making it a great choice for hobbyists and developers alike. It features both analog and adjustable ...

SKU: DF-DFR0836 | Brand: DFRobot

Note: The product not inclueded Raspberry Pi Pico. This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners to quick...

SKU: AF-856 | Brand: Adafruit

The MCP3008 is an 8-channel, 10-bit analogue-to-digital converter (ADC) with an SPI interface. It adds analogue input capability to microcontrollers and microcomputers that lack a built-in ADC — such as the Raspberry ...

SKU: KI-5647 | Brand: Kitronik

The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...

SKU: LB-LR0029 | Brand: Little Bird

DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use.  This  DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...

SKU: EF-EF04089 | Brand: ElecFreaks

Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...

SKU: LB-LR0006 | Brand: Little Bird

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...

SKU: LB-LR0298 | Brand: Little Bird

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temper...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: LB-LR0003 | Brand: Little Bird

This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...

SKU: DF-SEN0387 | Brand: DFRobot

This magnetic switch consists of two parts: a reed switch sensor with cable and a magnet trigger in a plastic housing. When the magnet is brought within approximately 1 cm of the sensor, the reed switch closes, allowi...

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: AF-2215 | Brand: Adafruit

A 16.000 MHz quartz crystal in the HC49/US short-style package, supplied with two 20pF load capacitors. The crystal provides higher precision than ceramic resonators, with 30 PPM tolerance and 50 PPM stability — suita...

SKU: EC-MCS01002S | Brand: Elecrow

Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functio...

SKU: DF-FIT0011 | Brand: DFRobot

INTRODUCTION The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the IO board. This price inclu...

SKU: LB-LR0097-1-NEW | Brand: Little Bird

This infra-red receiver module is perfect for Arduino projects. It has a wide range of applications, including remote control, wireless data transmission, etc.

SKU: LB-TILT | Brand: Little Bird

A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...

SKU: AF-3845 | Brand: Adafruit

This 3×4 matrix keypad provides 12 buttons (0–9, *, #) in a sturdy, rigid format. It uses a matrix scanning arrangement requiring only 7 pins to read all 12 keys, making it efficient to connect to Arduino, Raspberry P...