Humidity Sensors

SKU: SF-SEN-25200 | Brand: SparkFun

Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate...

SKU: SF-SEN-30480 | Brand: SparkFun

This capacitive soil moisture breakout is designed for plant monitoring projects where exposed metal probes can corrode after time in the dirt. It measures moisture using a capacitive plate embedded in the board, mana...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: SF-KIT-30715 | Brand: SparkFun

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedu...

SKU: SF-SEN-29260 | Brand: SparkFun

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: DF-SEN0657 | Brand: DFRobot

This all-in-one weather station sensor brings seven key environmental measurements into a single outdoor unit: wind speed and direction, temperature, humidity, atmospheric pressure, light intensity and rainfall.It use...

SKU: PR-PIM638 | Brand: Little Bird

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range...

SKU: AF-4516 | Brand: Adafruit

The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plu...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: AF-4881 | Brand: Adafruit

Here is a jolly cute, palm-sized, Bluetooth-enabled sensor to monitor your room's temperature and humidity. Only 43mm x 43mm, we dig its small form factor and minimal design. The shell is made of durable ABS&nbsp...

SKU: AF-4099 | Brand: Adafruit

Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensiron in a sintered metal mesh encasing. The casing is w...

SKU: PL-1643 | Brand: Pololu

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...

SKU: KI-5038 | Brand: Kitronik

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...

SKU: M5-K008 | Brand: Little Bird

 Description In comparision,**PROTO function Module** includes more stuff than PROTO Board.Other than the PROTO board, it also comes with a DHT12(temperature and humility sensor), M-BUS Socket and more....

SKU: M5-M017 | Brand: Little Bird

Description Node, like its namesake, is a smart node with full-featured functions in a IoT application scenarios. Together with M5Stack Core, it can be programmed as an intelligent speaker like Echo. Node provides ...

SKU: PI-RPI-005 | Brand: Pimoroni

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can...

SKU: PI-PYC006 | Brand: Pimoroni

The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger...

SKU: PR-PIM031 | Brand: Little Bird

The Weather module reads temperature and pressure. It's ideal for setting up a mini weather station to monitor conditions in your house or garage. Features BMP280 sensor Detects temperature and pressure ...

SKU: RP-SC0329_1 | Brand: Raspberry Pi Ltd

The Raspberry Pi Sense HAT is an add-on board that attaches to the Raspberry Pi via the 40-pin GPIO header, adding a suite of environmental and motion sensors, an 8×8 RGB LED matrix, and a mini joystick. It's the same...