Headers & Connectors

SKU: LB-00051 | Brand: Little Bird

This single-pin crimp connector housing lets you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair it with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: PI-ADP012 | Brand: Pimoroni

An RCA-to-screw-terminal adaptor for connecting audio or video signals to your project without soldering. Features a male RCA connector on one end and clearly marked screw terminals on the other. Specifications Con...

SKU: PI-CAB1001 | Brand: Pimoroni

This is a simple two wire cable. Great for jumping from board to board or just about anything else.There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for...

SKU: PI-COM1104 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.If your soldering isn't quite up to scratch, or you just don...

SKU: PI-COM1108 | Brand: Pimoroni

A single row of 40 female headers which can easily be cut down to any size you need! These headers can be cut to size with a pair of wire-cutters, though you will probably lose one pin with each cut.They mate very ...

SKU: AF-4029 | Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors o...

SKU: PI-COM1106 | Brand: Pimoroni

40 pin headers in one row of either straight or right-angle header, just cut to the size you need! Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 11.5 mm

SKU: PI-COM1107 | Brand: Pimoroni

40 pin headers in straight row.Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 11.5 mm

SKU: PI-ADP011 | Brand: Pimoroni

A handy adapter that converts bare wire connections into a standard 2.1 mm DC barrel plug. Strip your battery pack or power supply wires, secure them in the screw terminals, and plug straight into any board or device ...

SKU: PI-COM0001 | Brand: Pimoroni

This 2×20 pin female GPIO header with 3 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The short pin height keeps a low profile while still allowing access to the GPIO pins when used with pHAT o...

SKU: PI-ADP010 | Brand: Pimoroni

A handy adapter that converts a 2.1 mm DC barrel jack (female socket) into a screw terminal block. Plug a wall adapter or barrel-plug cable into the jack end, and access the power lines via labelled +/− screw terminal...

SKU: TB-HM3250 | Brand: Little Bird

A 40-pin (2×20) dual in-line (DIL) jumper strip rated at 3A. The snap-apart design lets you break the strip into individual 2-pin jumper shunts or smaller groups to suit your needs. Key Features Snap-Apart Design –...

SKU: TB-PP1150 | Brand: Little Bird

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specif...

SKU: PJ-HEADER_12X1 | Brand: Little Bird

A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and...

SKU: PJ-SOCKET_14X1 | Brand: Little Bird

A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Ke...

SKU: PJ-HEADER_14X1 | Brand: Little Bird

Pins (header), 14 pins, 0.1 inch (2.54 mm) spacing

SKU: AF-2428 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: SF-PRT-08670 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector

SKU: DF-FIT0084-Y | Brand: DFRobot

A pack of 10 yellow straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female heade...

SKU: AF-2889 | Brand: Adafruit

One truth about working with test equipment is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block BNC (Bayonet Neill–Concelman, for those in the k...