Headers & Connectors

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: TB-PS0804 | Brand: Little Bird

9 pin D9 socket Specifications Plug or Socket Type D9 Pack Quantity 1pc Contacts / Pins 9pc Case Material Nickel Plated Copper Device Socket Contact Material Gold Plated Attachment Method Solder Tag

SKU: SF-WRL-09144 | Brand: SparkFun

Itty-bitty U.FL SMD connector. Great for tight PCB layouts that require antenna connections. Documents: Datasheet

SKU: SF-TOL-08734 | Brand: SparkFun

Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors...

SKU: PL-2173 | Brand: Pololu

A male Tamiya-style high-current connector with two pre-crimped 10cm 14-AWG silicone-insulated leads. This keyed connector is commonly used with 7.2V RC battery packs and features a latch to prevent accidental disconn...

SKU: PL-1018 | Brand: Pololu

The 0.100″ (2.54 mm) 1×8-Pin Straight Female Header provides a reliable vertical connection point for standard 0.1″ pitch male headers. This single-row socket strip is one of the most common connectors used in electro...

SKU: SF-PRT-13156 | Brand: SparkFun

This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet

SKU: PL-972 | Brand: Pololu

A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features ...

SKU: TB-HM3235 | Brand: Little Bird

A 3-way WAGO-style lever-actuated splice terminal block for connecting solid, stranded, and fine-stranded conductors without tools. The lever mechanism allows different wire types and cross-sections to be combined in ...

SKU: PL-855 | Brand: Pololu

A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programmin...

SKU: PL-1798 | Brand: Pololu

A 30 cm (12-inch) adapter cable with a 3-pin female JST PH-style connector on one end and individual female pins for 0.1" housings on the other. Designed to connect Sharp analog distance sensors to breadboards, microc...

SKU: AF-6117 | Brand: Adafruit

This RJ-50 (10P10C) panel mount adapter plug provides a quick, clean way to add a pass-through RJ-50 jack to any enclosure or project panel. Simply drill a 30mm hole, insert the adapter, and secure it with the include...

SKU: AF-4981 | Brand: Adafruit

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy! This is an Ethernet (RJ-45) Terminal Block to Socket Adapter.&nb...

SKU: AF-5203 | Brand: Adafruit

A simple 20-pin FFC/FPC extender that lets you connect two 20-pin 0.5mm pitch flat cables end-to-end, extending the total cable length. Ideal when the included cable on a display, camera, or sensor module is too short...

SKU: AF-4905 | Brand: Adafruit

A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your...

SKU: AF-4929 | Brand: Adafruit

A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or J...

SKU: PL-4763 | Brand: Pololu

A 300mm (12″) cable with a female JST SH-style connector on one end and six unterminated colour-coded 28 AWG wires on the other. Designed for use with Pololu Micro Metal Gearmotor Encoders (both top-entry and side-ent...

SKU: M5-A034-D | Brand: Little Bird

Description GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This Grove cable, compatible with the GROVE port on M5Core,simply have 4 lines, two f...

SKU: M5-U039-B | Brand: Little Bird

Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just...

SKU: AF-3797 | Brand: Adafruit

A practical DIN rail-mountable adapter that breaks out all 8 wires from an RJ-45 (Ethernet) cable into individual screw terminal blocks. It's ideal for simplifying wiring in enclosures and panel builds — connect a sin...