Headers & Connectors

SKU: PI-CAB1001 | Brand: Pimoroni

This is a simple two wire cable. Great for jumping from board to board or just about anything else.There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for...

SKU: PI-COM1104 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.If your soldering isn't quite up to scratch, or you just don...

SKU: PI-COM1108 | Brand: Pimoroni

A single row of 40 female headers which can easily be cut down to any size you need! These headers can be cut to size with a pair of wire-cutters, though you will probably lose one pin with each cut.They mate very ...

SKU: PI-COM1106 | Brand: Pimoroni

40 pin headers in one row of either straight or right-angle header, just cut to the size you need! Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 11.5 mm

SKU: PI-COM1107 | Brand: Pimoroni

40 pin headers in straight row.Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 11.5 mm

SKU: AF-3972 | Brand: Adafruit

Make your next custom USB cable a breeze with a USB Micro B Male Plug to 5-pin Terminal Block. If you need to connect to a device with a micro USB plug or maybe make your own USB OTG device or custom cable of so...

SKU: PI-ADP011 | Brand: Pimoroni

A handy adapter that converts bare wire connections into a standard 2.1 mm DC barrel plug. Strip your battery pack or power supply wires, secure them in the screw terminals, and plug straight into any board or device ...

SKU: PI-COM0001 | Brand: Pimoroni

This 2×20 pin female GPIO header with 3 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The short pin height keeps a low profile while still allowing access to the GPIO pins when used with pHAT o...

SKU: PI-ADP010 | Brand: Pimoroni

A handy adapter that converts a 2.1 mm DC barrel jack (female socket) into a screw terminal block. Plug a wall adapter or barrel-plug cable into the jack end, and access the power lines via labelled +/− screw terminal...

SKU: TB-PP1150 | Brand: Little Bird

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specif...

SKU: PJ-HEADER_12X1 | Brand: Little Bird

A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and...

SKU: PJ-SOCKET_14X1 | Brand: Little Bird

A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Ke...

SKU: PJ-HEADER_14X1 | Brand: Little Bird

Pins (header), 14 pins, 0.1 inch (2.54 mm) spacing

SKU: AF-1665 | Brand: Adafruit

A matched pair of 6-wire cables with JST SM connectors — one plug and one receptacle. The latching connector provides a secure, compact connection that won't pull apart easily. Great for any project where you need a r...

SKU: SF-PRT-08670 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector

SKU: DF-FIT0084-Y | Brand: DFRobot

A pack of 10 yellow straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female heade...

SKU: SF-PRT-08096 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. ...

SKU: SF-BOB-00573 | Brand: SparkFun

This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Note: This breakout board was originally designed for a SIM socket with a switch for card detection. We have since switched...

SKU: SF-GPS-00579 | Brand: SparkFun

A 6-pin vertical JST SH connector in a surface-mount (SMD) package. With a 1.0mm pitch, this is a compact connector ideal for space-constrained PCB designs where a small, reliable connection is needed. This is the JS...

SKU: SF-PRT-00437 | Brand: SparkFun

A USB Type-A male connector, ideal for making compact USB dongle devices that plug directly into a computer's USB port or connect through a USB A-to-A extension cable. Key Features Type-A Male – Standard USB connec...